18
8.7. Important Notes on APP Wi-Fi Connection
No.
Notes
1
When the camera’s Wi-Fi is connected, the camera
will stop SURVEILLANCE (motion detecting or time
lapse). Disconnect Wi-Fi to enable the camera to go
back to SURVEILLANCE mode.
TIP: How to re-enable the camera start motion
detection?
Tap the camera ID “JOHN_A350W” to disconnect, or
delete your camera (refer to the following figures).
2
On the phone device, when the APP is closed or runs
in the background, there is a maximum of 90-second
timeout of Wi-Fi connection between APP and
camera, before timeout, you can re-open and operate
on the APP without reconnecting. However, the
camera will not work (capture motions) until the
Wi-Fi timeout is done. Before timeout, you must
disconnect Wi-Fi manually to enable the camera to
capture motions.
3
When the APP connects to the camera, the RED
indicator will flash once.
