10
that shows how many images have been taken, the battery
level, camera or video mode, etc.
Attention please
: In the
ON
mode, the camera will
automatically enter
SURVEILLANCE
mode if there is no
operation (key pressing) within
5
minutes. Then the camera
will perform as your settings in the menu.
In the
ON
mode, you can connect the camera to a computer's
USB port to download your images.
7.3. SURVEILLANCE MODE
Anytime after the batteries and SD card have been inserted,
you can switch on the camera. When the
START
button is
pressed, the camera will enter into the
SURVEILLANCE
mode. If the Mode in the settings is set as “Motion Detection”,
the camera will countdown 30-second delay and then be ready
to capture images. If the Mode is set as “Time Lapse”, there
will be no 30-second counting down, and the camera will be
ready to enter Time Lapse.
Once in the
SURVEILLANCE
mode, no manual controls are
needed or possible (the control keys have no effect). The
camera will take photos or videos automatically (according to
its current parameter settings).
You can press the
START
button again to wake up the camera
and reprogram your camera if required.
8. ADVANCED SETTINGS
The trail camera comes with preset manufacturer settings. You
can change the settings to meet your requirements. Once the
camera screen is on, press
MENU
key to enter/exit the menu.
