Blaze Outdoor BLZ-WVH-42, Руководство пользователя

Страница: 12 / 18

7 | BLAZE OUTDOOR
STEP 2
Install the two grease trays in the front and
back of the unit. When installed, these trays
will accept the grease filters on the bottom
side. The skinny tray goes to the front of the
hood and will provide a barrier between the
filters and the control knob connections.
The larger tray installs in the rear channel
at the back of the unit.
.
Electrical Requirements - Hood comes with 4-foot cord, and will plug into a 110V
outlet which should be wired to a 15 AMP breaker.
wall hood installation
Install all grease fi lter handles to the fi lters using
the included screws. Three fi lters cover the front
section of the hood and three cover the rear.
Install the fi lters leaving the bottom of the fi lters
resting in the previously installed grease trays
and the tops will lay in the U shaped channel in
the center support. Install the center grease
trays fi rst (as there is an opening for the tray to
leaving the middle tray for last.
STEP 3
When installing the drip trays, place the larger tray
in the back of the unit and the smaller one in the
front.