8
LEVELING THE UNIT
Position the unit on a flat, level surface capable of
supporting the entire weight of the unit when full.
This unit contains (4) adjustable leveling legs.
Turn the legs clockwise to raise and
counterclockwise to lower.
-
Put the screws on the top of door where
the handle is to be installed.
-
Align the handle with screws, tighten the
screws using the screwdrivers.
ELECTRICAL CONNECTION
This appliance should be properly grounded for your safety. The power cord of this appliance is
equipped with a three-prong plug which mates with standard three-prong wall outlets to minimize the
possibility of electrical shock.
Do not under any circumstances cut or remove the third (ground) prong from the power cord supplied.
For personal safety, this appliance must be properly grounded. Any questions concerning power and/or
grounding should be directed toward a certified electrician or an authorized service center.
This appliance requires a standard 115/120 Volt AC~60Hz three prong grounded electrical outlet. Have
the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly
grounded. When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to
have it replaced with a properly grounded 3-prong wall outlet.
To prevent accidental injury, the cord should be secured behind the appliance and not left exposed or
dangling.
The appliance should always be plugged into its own individual electrical outlet which has a voltage
rating that matches the rating label on the appliance. This provides the best performance and also
prevents overloading house wiring circuits that could cause a fire hazard from overheating. Never
unplug the appliance by pulling on the power cord. Always grip the plug firmly and pull straight out from
the receptacle. Repair or replace immediately all power cords or abrasion damage along its length or at
either end. When moving the appliance, be careful not to damage the power cord.
