3
2. Product Appearance
Please refer to the following sheet for more details about each port.
Note:
To perform a factory reset press the reset/WPS button for 15 seconds until the green Indicator light
turns off and the red Indicator light turns on and starts flashing. Now wait until the Green Indicator
light flashes slowly. Now the camera is reverted to default settings.
For advanced users who want to configure by WPS instead of the recommended WIFI or Ethernet
configuration, please refer to Web Interface manual. To download the Web Interface manual, please visit our
website
http://security.blaupunkt-service.com
Please refer to the following sheet for more details about status of indicator light.
Indicator light status
Device status
Red light normally on
Booting
Green light slow flashing
Booting completed, await wifi config, enter smart config
status;
Green light quick flashing
Wifi smart config in progress, including WPS (Wi-Fi
Protected Setup), management frame and etc.
Green light normally on
Wifi connection succeeded, operate normally.
Red and green lights flash
alternately
Device upgrade
Red light slow flashing
Network connection failure or disconnection after
network connection success.
Red light quick flashing
Device malfunction, fail to boot up; alarm or SD card
malfunction
SN
Name
1
USB power supply
2
Reset/ WPS button
3
Micro SD Card Slot
4
Speaker
5
Lens
6
Indicator light
7
Microphone
En
gl
ish
