Blaupunkt Viking TMC 148, Руководство по эксплуатации

Страница: 26 / 33

26
SCAN will also stop if you
•
press DSC, SRC, , << >> or / .
Clock - Time
This car radio has been equipped with a
built-in clock which automatically takes ad-
vantage of RDS to ensure highly accurate
time-keeping.
Setting the clock
a) automatically
The clock is set automatically when the
radio is tuned into an RDS station
which has the “CT” (clock time)
function.
b) manually with DSC-CLOCKSET
• Press DSC briefly, “CLOCKSET” will
appear in the display.
• Press << >> to set the hours/minu-
tes. Press / to move the flashing
cursor to a different position.
• After you have set the clock, press
briefly to store the new setting.
Displaying the clock
You can set the clock to permanent display
in both the radio and CD modes.
If you select another function, e.g. a diffe-
rent radio station, the clock will disappear
from the display for approx. 8 sec. and show
the function selected.
To switch between display modes
•
press LD for approximately 2 sec.
Correcting the clock after the
power has been disconnected
If the radio has been disconnected from its
power source for a longer period of time,
“0:00” will appear in the display when it is
re-connected.
The time will be set automatically by RDS-
CT, but can also be adjusted manually if
desired.
You will not have to set the time manually
unless it is not possible to receive an RDS
station with CT (clock time).
Deactivating the hour correction
function
In the DSC menu it is possible to switch off
the hour correction function with “CLK MAN/
CLK AUTO”. An automatic correction for
minutes will continue to take place.
This is useful if you would like to display the
time for a different time zone, for example.
If necessary,
•
Press DSC briefly and
• press / as often as required until
“CLK MAN/CLK AUTO” appears in the
display.
To deactivate the hour correction function
press << >> to select “CLK MAN”.
•
Press << >> to set the hours/minutes.