background image

44

Traffic Information

This device is equipped with an RDS
EON receiver. EON means Enhanced
Other Network.
Whenever a traffic announcement (TA)
is made, the radio switches automati-
cally from a station that does not broad-
cast traffic information to one in the
chain of stations that does.
After the traffic announcement, the de-
vice returns to the station that was pre-
viously tuned in.

Switching Traffic Information
Priority On / off

Press the TIM button 

@

 for longer

than two seconds.

Traffic announcement priority is activat-
ed if the traffic jam symbol is illuminat-
ed.

Note:
You will hear a warning tone:

If you leave the reception area of a
traffic radio station you are listening
to.

If, when you are listening to a cas-
sette, you leave the reception area
of the selected traffic radio station,
and the automatic search which
then follows fails to find a new traf-
fic radio station.

If you change from a traffic radio
station to a station with no traffic
information.

Either switch off the traffic information
priority, or switch to a station with traffic
information.

Adjusting the Volume for Traffic
Announcements

Press the MENU button 

8

.

Press the   or   button 

:

 until

“TA VOLUME” appears in the dis-
play.

Use the     buttons 

:

 to adjust

the volume.

Press the MENU button 

8

 or OK

;

.

Note:

During a traffic announcement you
can adjust the volume for the dura-
tion of the announcement using the
volume control 

2

.

Note:

You can set the tone and volume
for traffic announcements. For
more information, consult the sec-
tion on “Tone and volume controls”.

TRAFFIC INFORMATION

Содержание Verona C51































Отзывы: