Blaupunkt TIF 30 DA, Руководство пользователя

Страница: 3 / 4

Troubleshooting Guide
This section covers common problems the user may encounter while using
this device.
Product Parameters:
Helpful Tips:
1. Do NOT keep the device near a heat source
2. Do NOT use this device near flammable liquids or gas source
3. Should the device need attention, please visit an Authorized Service
Centre. Any attempt to service the device by unauthorised person will
VOID warranty
4. This device is designed to be used with a 12V supply source only. Do NOT
attempt to use it with a 24V supply source
5. This device is designed to be used to inflate tires for all types of Cars
including SUV’s.
6. It is normal for the device to get hot after continuous use.
7. It is recommended to use this device to inflate tyres for no longer than it’s
suggested cycle time at a go.
Accessories : Following accessories are included in the package: 1 qty spare
fuse and 3 qty multi - function air inflator nozzles.
Steps for changing fuse:
Unscrew the top of
the cigarette lighter
adaptor
Remove blown fuse &
insert spare fuse
provided
Screw the top end of
the cigarette lighter
adaptor to make a
tight seal
Nature of problem
Device not working
Cause and recommended solution
Fuse is blown - replace fuse and check device
The preferred tire pressure was not preset
correctly and causes the display to blink
continuously. Turn off the device, set the
preferred tyre pressure and Turn ON device.
Device is
operating erratically
The quick release valve connector is not
connected to the valve stem securely - causing
a leak and hence showing erratic readings.
Release the connector from the valve stem and
reconnect securely
TIF 30 DA - 12V TIF 30 DA - 12V
Input Voltage
DC 12V
Power Cord
Length
110W
30MM
MAX Duty
Cycle
< 10 min 150PSI
Power
Cylinder Diameter
MAX Air Pressure
3 Meters