FRONT / REAR CAMERA INSTALLATION
TROUBLESHOOTING
Problem
Display monitor / car radio does not
show reverse view when reversing.
Reverse view does not show even
after restarting the display monitor/
car radio.
Reverse view does not show even
though power supplies of the reverse
light or the rear car plate light is
properly connected.
Solution
Restart the display monitor / car radio.
Examine if the power supplies of the reverse
light or the rear car plate light is properly
connected.
Examine if the power supply cables of the
reverse light or the rear car plate light is
damaged. Repair/replace if the cables are
damaged.
If any of the following problem occur, please resort to Troubleshooting for the possible
solutions. Consult Blaupunkt authorized dealer if problem persist.
5
6
FRONT / REAR CAMERA INSTALLATION
Type 1 Installation Wiring
Reverse Camera Wiring
Cut white and purple wires when
using as reverse camera on rear
back door.
Before Cutting Wires
After Cutting Wires
Reverse Camera Wiring
Do not cut the wires when
using as reverse camera near
license plate.
Type 2 Installation Wiring
Rear Camera Wiring (Remove Parking Line)
Front Camera Wiring (Flip Viewing Display & Remove Parking Line)
Reverse Camera
Do not cut the wires when using
as reverse camera.
Rear Camera
Cut blue wire when using as front
camera to
remove parking line
.
Front Camera
Cut white & blue wires when using
as front camera to
flip viewing
display & remove parking line
.
Reverse Camera
Do not cut the wire when using
as reverse camera.
