Blaupunkt Q-Pro, Быстрый старт

Страница: 5 / 80

5
English
IMPORTANT - Read before installation
• Make sure the installation sight is close to the router or a network Ethernet port.
• Do not install the Q-ProHub at open visible sight to avoid non-authorized manipulation.
• Tamper protection for the Q-ProHub is working only for wall installation. This is because the detachment of the
Q-Pro from the wall mounting bracket will activate the tamper alarm.
• The Q-ProHub tamper is pressed by the wall mounting bracket. Do not remove the wall mounting bracket even if you
decide to use the desk-stand. The Q-ProHub will not function properly without the mounting bracket attached at its back.
1.
Status LED (Red & Green)
Red On – Arm mode
Red Flash – Home mode
Green Flash – Learning mode
Green Off – Walk Test mode or Disarmed
2.
Alarm & Fault Status LED (Red & Yellow)
Red On – Alarm in Memory
Red Flash – Alarm
Yellow On / Flash – System Fault
3.
Standing Bracket (For desktop deployment)
4.
USB Port: For DG2-Pro and DG4-Pro
5.
Learn / Reset Button
6.
Ethernet Port
7. ON/OFF Battery Power Switch
8.
Power Supply connector. DC 12V 1A
9.
Panel Tamper
10.
Wall Mounting Knockouts x 2
11.
Bracket Hooks
12.
Mounting Bracket
2. Q-ProHub Appearance
1
2
3
4
5
6
7
8
9
10
10
12
11 11
1
2
3
4
5
6
7
8
9
12
11
10