3. Volume adjustment:
Turn the main volume knob on the top panel, or press VOL+/- button from remote control can increase
or decrease the output volume level. The VOL +/- button on remote controller is major use for small step volume level
adjustment. The max volume is limited by setting of main volume knob. In case of the remote controller is lost, and the output
volume is too small, please power off and on the unit again, then the volume setting will reset.
4. Treble & bass adjustment:
rotate the treble and bass knob on the top panel can adjust the output sound level.
5. Sound silence:
press the MUTE from top panel or remote control can make the sound in silence; press it again to resume the
sound output.
6. Preset EQ:
press the relative button from remote control can switch the EQ between
Jazz/Classic/Flat/POP/ROCK/Country(available in USB/SD mode only).
7. Play/pause:
press the button to pause the music, and press it again to resume the playback in Bluetooth/USB mode.
8. Repeat & Random:
press the button to switch the music playback in repeat one/repeat all/off mode; press random button
for random on/off playback in USB/SD mode.
9. Disco light:
press the light button repeatedly can switch the disco light between 8 type effect, and turn off light.
10. Reset:
press the reset button from remote control to set up the unit in factory default mode.
11. Super bass:
push the super bass control pin can enhance the bass for sound output.
FM radio operation
Before start the FM radio listening, please try to move the unit next to the window or other location in order to better FM
reception. Insert the included FM wire antenna into the FM antenna socket which locates on rear panel of unit, and full extent
the antenna for reception.
1. Auto scan and preset radio station (All-in-one):
short press the play/pause button on top panel, or press the search button
from remote control to auto scan and save the available radio station. The unit will auto play the first preset station after
finished scanning. ( max supported preset station:40)
2. Preset station picking up:
in radio mode, press the next/previous button on top panel or remote control to pick up and play
the last and next preset station.
3. Manual tune:
short press the FF+/- button from remote control to adjust the station frequency as per 0.1MHz; press and hold
the previous/next button 2 seconds to scan the available station in upward or downward frequency, and auto play the station.
USB/SD playback operation
The product includes USB/SD playback function which can decode and playback the music from a USB/SD storage device.
Before start the operation, please copy the MP3/WMA format music into the device; and insert the device into the unit first,
because the USB/SD mode is only available when the device was plugged on unit successfully. Then the unit will detect and
play the inside MP3/WMA music automatically.
Track selection: short press the next/previous button to select next and previous track; press and hold the button for fast-
forwarding and rewinding the playing music, and resume to normal playback after release the button.
In USB/SD mode, you can achieve the play/pause, mute, repeat, EQ, treble/bass stop function etc. Please reference the
operation from the general operation part on this manual.
Notes:
a. Connect the USB stick by a USB extension cable for playback is not recommended which may produce noise or intermittent
sound due to audio data loss during transfer.
b. Decode and playback all MP3/WMA format music is not guaranteed.
c. The max supported storage device is 32GB.
d. Some different device and brand may take a little long time to playback; please kindly note this is not mal-function.
Bluetooth operation
This product includes Bluetooth function which can wireless playback the music from other Bluetooth device (like smart
phone, tablet etc).
1. Press the mode button repeatedly to enter Bluetooth mode, and the Bluetooth symbol will flare on display which means the
unit is ready to pair.
2. Enable the Bluetooth function on your device, and search the available device (please reference your device manual for
operation), then check the available Bluetooth device on the list. Select “ BP PS11DB” for pairing, and the Bluetooth symbol will
stable on display after paired successful.
3. Select and play the music from your Bluetooth device, then the sound will come out from the speaker
4. Press the previous/next button can select last and next track during playing.
5. In Bluetooth mode, you can achieve play/pause, mute, treble and bass adjustment etc. function. Please reference the
operation from the general operation part on this manual.
Notices:
a. All Bluetooth devices are not guaranteed for pairing successfully due to different design and brand.
b. The best working distance of Bluetooth is within 10 meters without any obstacle in between.
c. The unit only can pair and work with one Bluetooth device in one time.
d. In case of an incoming phone call during Bluetooth playback; the music will stop temporary, and resume to playback after
end the phone call.
e. Press the pairing button from remote control can quit the current Bluetooth device connect and start pair with other device.
Line in/AUX IN/MP3 link operation
In order to wire connection and playback the music with other player or amplifier, please follow up below operation.
6
