Blaupunkt PP14BT, Руководство пользователя, Страница: 14 / 162

12
2. Turn on or enable the Bluetooth function on your Bluetooth device (smart phone etc., detail
reference your device operation manual), and scan the available Bluetooth device.
3. Please check the available Bluetooth list of your device, and select “BP PP14BT” in order to
start the pairing (input “0000” in case of a POP password required). There will have a notice
sound come out from the radio after pairing successfully.
4. Select and play the music from your Bluetooth device, then the sound will output from the
radio.
5. You can press the Previous/Next/Play/pause button to get the relative operation.
6. Press and hold the Play/Pause button 3 seconds can disconnect the pairing between the
current Bluetooth device and unit. And the unit will ready to pair with other Bluetooth device.
Phone call hands free operation: When there have an incoming call in Bluetooth playback
mode, press the Play/Pause button on front panel can pick up the call, and press the Play/Pause
button again can end the call. Please kindly put your mouth talk and next to the microphone
hole (next to right top corner of display) because the microphone was built in behind the front
panel.
Note
：
a. Not all Bluetooth devices are guaranteed to pair successfully due to different brand and
design.
b. The best working distance for Bluetooth operation is within 10 meters without any obstacle.
c. Please do not put your cell phone next to the unit too close in phone call hands free mode;
otherwise, there will have interference and impact the sound quality reception.
AUX IN/MP3 Link operation
Using the supplied 3.5mm stereo to 3.5mm audio cable and connect the AUX IN jack on the rear
panel of unit to other player( like MP3 player etc..). Then the unit will enter to the AUX IN
playback mode directly. Select and play the music from your player, then the sound will output
from radio.
Please kindly note the main control is on your player side. The radio only can adjust the volume,
play/pause function in AUX in mode.
Specification:
Power source: DC IN 5V/600mA; 3.7V/1800mA(Battery power)
RMS Output power: 2 x3W RMS. FM frequency: 87.5~108.0MHz.
USB rating output: 150 mA. Bluetooth version: CSR V4.0
Power consumption: 9.5W Standby power consumption: < 0.5 W
Factory default:
System time: 00
：
00, 2017-01-01
Time format: 24hours.
Sleep: OFF.
Alarm duration: 5 minutes
Volume: 15
(The specification may revise without prior notice)
PP14BT