17
FRANÇAIS
ENGLISH
ESPAÑOL
PORTUGUÊS
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
If you want to alter a name which has al-
ready been entered, select that CD in the
DSC mode and overwrite it in the editing
mode. If you want to change individual let-
ters only, press << >> to move the cursor
to the corresponding position and change
that letter.
LIST
In DSC mode (Direct Software Control) it
is possible to assign names to your CDs.
In LIST mode you can view these names
without interrupting CD playback. If you
have not named the CDs, the display will
list the numbers only.
To enter LIST mode:
•
Press 6/LIST, “LST” will appear in dis-
play field 1
•
Press / to see CD names
•
If you see a CD you want to hear,
press << >> to select that CD and it
will begin to play.
•
If you don't select a CD, the LIST
mode will automatically end after 8
seconds.
Note:
In order for names to be seen in the LIST
mode, the named CD must have been se-
lected at least once since the magazine was
inserted.
Naming CDs
To allow you to identify your CDs more
quickly, you can use DSC programming to
enter individual names for up to 99 CDs.
The names can have up to 7 characters.
If you attempt to enter more than 99 names,
“FULL” will appear in the display. The CD
name has priority over the CD number in
the display when manually changing CDs.
Proceed as follows:
Select DSC programming mode.
•
Press DSC.
•
Press / to select CDC_NAME.
•
Press << >> to enter the select mode.
•
Press / to select the CD you want
to name.
•
Press << >> to switch to the editing
mode. If the CD you have selected
does not already have a name, 7
dashes “_” will appear in the display.
•
The cursor will flash at its current po-
sition. Press << >> to move it.
•
Press / to select the character you
want to enter. Select a dash “_” to
leave a blank space.
•
Press DSC to store the name. The
main CDC_NAME menu will appear
again in the display.
Deleting CD names
Deleting one CD name
Proceed as follows:
Select DSC programming mode.
•
Press DSC.
•
Press / to select CDC_NAME.
•
Press << >> to enter the CD select
mode.
•
Press / to select the name you
want to delete.
•
Press DSC and hold it down. After 2
seconds you will hear a beep and
“ONE_NAME” will appear in the dis-
play.
•
Release DSC after 2 seconds but be-
fore 8 seconds. “DELETED” will ap-
pear in the display.
•
The name of this CD has now been
deleted. The main CDC_NAME menu
will appear again in the display.
