Blaupunkt MUNCHEN RDM 126, Руководство по эксплуатации

Страница: 22 / 29

48
CD and CDC operation
Selecting the display mode
You can select the desired display mode for
CD operation:
“NAME” – The specified name, for
example “MADONNA”
will be displayed.
“TIME” – The elapsed playback
time of the title is dis-
played, for example
“2 : 32”.
In addition for CDC operation:
“NUMBER” – The CD position in the
magazine (disc number)
is displayed, for example
“CD 8”.
To switch the display mode:
•
Press the AF button during CD play-
back.
The display mode and the corresponding
setting or value will briefly show on the dis-
play panel, e.g. “TIME”, “2 : 32”.
If you have selected “NAME” without hav-
ing specified a name for the corresponding
disc, “CD PLAY” will appear in the display.
Please read also the chapter “Entering CD
names”.
Storing the display mode
You can store your preferred display mode
which will then be active each time the ra-
dio is switched on.
If required,
•
press AF as many times until the de-
sired setting is displayed.
• Hold down the AF button until you hear
a beep.
SCAN operation
Use this function to scan all of the CD tracks.
For CDC operation, the system will scan the
titles of all discs.
To start the Scan function:
•
Press SC/MIX for approximately one
second.
The titles will be scanned one after the oth-
er in ascending order.
To stop the Scan function:
•
Press SC/MIX once again briefly.
The track currently being scanned is con-
tinued to be played.
SCAN will also be terminated by
•
pressing one of the buttons AUD,
GEO, DSC, SRC, TPM,
,
<< >> or / .
TPM
Track Program Memory
Use this feature to programme and play your
favourite CD titles.
Up to 30 CDs can be managed in the CD
mode, up to 99 discs in the CDC mode.
Storing tracks with TPM
Make sure that the TPM function is switched
off (“TPM” not shown on the display panel).
If you have not yet stored a track in the TPM,
the function will be unavailable.
If required,
•
switch TPM on/off by pressing the
TPM button.
• Use / to select a track. The track
number will be displayed.
• Hold down the TPM button until you
hear a beep.
Now the track has been stored.
With CDC operation, a “ “ symbol will ap-
pear in front of the CD name.
Then select the next track with / and store
with TPM, as detailed above.
You can also store a track at any time dur-
ing CD playback. For this it is necessary that
“TPM” and “SCAN” are deactivated.
Programme TPM information for other CDs
in the same way.
München RDM126 gb® 03.05.2002, 10:33 Uhr 48