AUX IN/line in/MP3 link and headphone operation
In order to wire connection and playback the music from other player or source, please follow up below operation.
1. Using the supplied audio cable( 3.5mm stereo to RCA) connect the LINE IN jack(RCA type) on rear panel of main unit, and the
another 3.5mm stereo connector connect with line-out or headphone jack of outsourcing player.Then switch to LINE IN mode
by pressing the source button.
2. Select the music and play on your player, then the sound will output from the micro system.
3. In AUX IN playback mode, the main control is on the outsourcing player side. But you also can control the volume, EQ and
mute the sound on the micro system side.
Headphone:
plug the headphone connector into the headphone jack on front panel, then the sound will silence in micro
system, but output from the headphone. Adjust volume setting on micro system or headphone to get the comfortable sound
level for listening.
Line out:
using the supplied audio cable ( 3.5mm stereo to RCA) connect the LINE OUT jack(RCA type) on rear panel of main
unit, and the other terminal connnect with AUX IN jack of outsourcing active speaker. Select and play the music on the micro
system side, then there will have sound output both on the micro systen and outsourcing active speaker.
Trouble shooting
1. Cannot power on the unit
a. Please check if the AC power cord was connected wall outlet properly.
b. Please contact with service center in case of the problem remains.
2.No sound output.
a. Please try to adjust the volume.
b. Please check if you selected the correct play mode.
c. Please contact with service center in case of problem remains.
3.The CD disc cannot read out, or intermittent sound during playback.
a. Please try to replace and play another one CD disc with CD/CD-R-RW/MP3/WMA format music.
b. Please try to clean up the CD disc due to dirty dot or scratches.
c. Please contact with service center in case of problem remains.
4.Background noise during FM playing.
a. Please full extent the FM antenna, try to adjust the antenna direction.
b. Please move the unit to next the window.
c. Please switch to other station for listening.
5. Intermittent sound during Bluetooth playing.
a. Please try to move your Bluetooth device more close to the unit.
b. Please try turn off the Bluetooth function and repair it again.
6. The remote control does not work well.
a. Please close and direct to the remote control sensor for operation.
b. Please replace the battery with fresh one due to weakness battery power.
Specification
Power source: AC 110-240V, 50/60 Hz
CD compatible: CD/CD-R-RW/MP3/WMA
FM frequency: 87.5-108.0 MHz
USB rating: 5V, 500mA, 2.0 versions, supported up to 32GB storage device
Bluetooth: V4.2, within 10 meters for operation.
RMS output power: 2 x 5W
Power consumption: 20W
Standby power consumption: < 0.5W
(Note: the above specification may revise without prior notice.)
8
