FM radio operation
Before start the FM listening, please kindly full extent the rear FM wire antenna or move the unit next to the window in order to
get better FM reception.
Power on the unit, press source button repeatedly on front panel in order to enter FM mode.
1. Auto tune and preset (all-in-one):
long press(2 seconds) the play/pause button on remote control or front panel can tune
and save the available station automatically. The unit can save up to 40 preset stations. Long press (2 seconds) the
previous/next button on front panel will scan and play the available station in upward or downward frequency automatically.
2. Auto scan and manual tune:
Short press the “ fast-rewind” and ” fast-forward” button on remote control can increase or
decrease the FM frequency per 0.05MHz. Press and hold the button in 2 seconds can auto scan the available station.
3. Station memory in manual:
when you turned a favorite station, short press the save button first, and then press the
previous and next button to switch the desirable preset station number, press save button again to confirm it. Then the current
station will be save in your desired preset station.
4. Get a specific frequency station:
in order to get a specific frequency station, you can input the frequency directly by the
digit button on remote control. For example, you want to listen the radio frequency at “ 104.3 MHz”, you just need key-in digits
1-0-4-3 by remote controller, and wait a while. Then the unit will skip and play the defined station.
5. Preset station picking up:
short press the “ Previous” or “ Next” button on remote control or front panel can pick up the
preset station; Or input preset station number by digit button on remote control for picking up. For example, you want to listen
the preset station number 12, please just key in 1-2 by remote control, then the relevant station will be played.
Tips: In FM radio mode, if there have many background noise on the station, please try to press the “ MO/ST” button on remote
control switch to mono speaker output which may reduce the background noise.
USB playback operation
Before start the playing, please copy MP3 format music and insert the USB device into USB port, press the source button
repeatedly to enter the USB mode. The unit will auto detect the device and start playing.
In USB playback mode, you can achieve the volume adjustment, mute, play/pause, repeat, fast-forward and fast-rewind,
previous and next track, and treble & bass adjustment function, loudness etc. after press relative button.
Notes:
a. Depending on the amount of data and media, it may takes longer for the unit to read out the USB device. In some cases, the
reading time may up to 60 seconds. This is not a malfunction.
b. Using USB extension cable for playing connection is not recommended which may impact the audio data transfer, and cause
the sound output intermittently.
c. Even when the files are in a support MP3 format, some may not play or display depending on the compatibility.
d. The maximum supported capacity of USB device is up to 32GB, support MP3/WMA music file.
Bluetooth operation
The unit includes Bluetooth function which allows you to wireless playback the music from your Bluetooth device. Please
reference below for operation.
1. Press the source button enter to the Bluetooth mode.
2. Enable the Bluetooth function on your Bluetooth device (please reference your device user manual for the operation), and
then check the available Bluetooth device on the menu list of your device. Please select “ BP MS16BT” on list(please input “0000”
in case of POP password request). Then your device will start to pair the speaker system.
3. Please select the music from your Bluetooth device and start the playing, then the audio will output from the speaker system.
4. You can press the “Next/previous” button to select the track, and press “play/pause” button for playback operation; long
press(2 seconds) the play/pause button to disconnect the current Bluetooth device pairing.
Note:
a. Some devices may pair and connect immediately; some may take longer time due to different brand and designed Bluetooth
product.
b. The unit only can pair and playback with one device at one time.
c. The best working distance of Bluetooth is within 10 meters. You can try to move your Bluetooth device close to the unit in
case of sound output intermittently.
d. To connect another Bluetooth device, you have to turn off the Bluetooth function on your current device. Then reference
above for operation.
AUX IN/MP3 LINK playback operation
Using the supplied 3.5mm stereo to RCA audio cable connect with the line out jack of your player (E.g. mp3 player etc), and
connect another terminal of audio cable to the AUX IN jack on the rear panel of unit, then press source button on front panel
enter to the AUX IN mode. Select the music and start the playing from your player, then adjust the volume of unit. The music will
output from the micro system speaker.
Please kindly note the main control is from your player in AUX IN mode. You can adjust the volume from the micro system.
7