41
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
•
Press the desired preset button until
the radio resumes play after the mut-
ing (takes approximately 2 seconds,
confirmed by a beep).
Now the station has been stored.
The display will indicate which preset but-
ton is currently activated.
Note:
Should you attempt to store a station which
has already been stored before on another
memory bank, the corresponding preset
button and the memory bank will flash brief-
ly in the display.
Automatically storing the
strongest stations with Travel-
store
You can automatically store the six most
powerful FM stations in your current recep-
tion area sorted according to their signal
strength. This function is particularly con-
venient on longer trips.
•
Press the BND button for 2 seconds.
“T-STORE” will appear in the display.
The six strongest FM stations will be auto-
matically stored on the memory bank “T”
(Travelstore). When this process has been
completed, the radio will play the first sta-
tion.
If desired, stations can also be stored man-
ually in the Travelstore bank (see “Storing
stations”).
Recalling stored stations
You can recall any stored station at the touch
of a button.
•
Select the waveband by pressing
BND. For FM, also choose the corre-
sponding memory bank by pressing
the BND button as many times as nec-
essary until the desired bank appears
in the display.
•
Press the corresponding preset button
briefly to recall the station.
Scanning stored stations with
Preset Scan
You can briefly scan through all of the stored
stations on all wavebands in the selected
FM memory bank.
Preset Scan cannot be started unless PTY
has been switched off (“PTY” is not lit up in
the display).
•
If necessary, press PTY.
To start Preset Scan:
•
Press SC for approximately 2 seconds.
If “AF” is not lit up,
•
press AF.
This fulfils the requirements for selecting
stations with << >>.
Switching between the memory
banks (FM)
You can switch between the memory banks
I, II and T in order to store stations and re-
call them later.
The currently selected memory bank is in-
dicated in the display.
•
Press the BND button as many times
as necessary until the desired memory
bank lights up in the display.
Storing stations
On FM, you can store six stations on the
preset buttons 1, 2, 3, 4, 5, 6 for each of the
memory banks I, II and T.
On MW/LW, you can also store six stations
each.
•
Select the appropriate waveband by
pressing BND.
•
Tune in a station with the rocker switch
(either automatically / or manually
<< >>).
