Blaupunkt MC CD 42e, Инструкция по эксплуатации, Страница: 57 / 63

USB Operation
To listen to a USB device:
1. Connect the device USB to the USB port on the front panel of the unit.
2. Press the
SOURCE button to cycle through and enter relevant mode. The unit
will detect devices automatically.
3. If the USB devices haven’t been connected, words “
NO USB ” will appear on the
display.
4. Then insert the USB device. After the device is found the player starts playing
automatically.
Playback operation:
1. When the device is reading the USB, it automatically sorts all available files in
numbers. You can select tracks by pressing Number buttons.
2. Press
PLAY/PAUSE button to start or pause playback.
3. Press STOP button to stop playback. Press PLAY/PAUSE to start playback from
the beginning.
4. Press
PREVIOUS /NEXT buttons to select the previous or next track.
5. Use the MUTE button or /- buttons to control the volume.
6. Press button to FAST FORWARD . Press once to fast forward at speed x1, press
twice to fast forward at speed x2. Press a third time to resume to normal speed.
7. Press button to
FAST REVERSE . Press once to fast reverse at speed x1, press
twice to fast reverse at speed x2. Press a third time to resume to normal speed.
8. When all the tracks have played over, press the button to start the playback from
the beginning.
Note :
1. USB extension cable shall have a max. length of 0.25m.
2. Depending on the amount of data and media speed, it may take longer for system to
read the contents of media device. In some cases, reading time may be as long as 60
seconds.This is not malfunction.
3. Depending on the content some files may not play or be displayed even when they
are in a supported format.
4. The max. supported capacity of USB devices is 32GB.
5. Connect your USB device directly to the USB port of the unit. Using an extension
cable is not recommended and may cause interference and failure of data transfer.
MS BT 26e/MC CD 42e
57