Blaupunkt LS 275e, Инструкция по эксплуатации

Страница: 57 / 61

LS 275e
H. 5.1 CH PLAY MODE AND REAL SURROUND SOUND EFFECT
Adjust all output settings including VOLUME, SW, FRONT, CEN, REAR (if necessary) now to
enjoy the wonderful and tremendous Home Theater effects.
I. MUTE
1. Press the MUTE button on the remote controller once to keep the performance silent.
2. MUTE on the front panel will then indicate ”UOO”.
3. Press it again to resume the performance.
J. RESET
Press the RESET button on the remote control and it will reset all settings including SW
Speaker output, Front Speaker output, CENTER Speaker output, Rear Speaker output to
factory default settings.
On digital and analogue input mode, you can press “5.1ch” button to switch to 5.1ch
output. But the real surround sound effect is only possible to have via digital inputs
(coaxial or optical). Before start playing the music and enjoying real surround sound effect,
you need to check and make sure that the digital output on audio setup menu of your
DVD player or TV is on original source output position (like Dolby, AC-3, DTS etc.,
depending on DVD player and TV). For details please follow the instruction manual of your
DVD player or TV. Please kindly note that they also have 5.1ch output on analogue input
mode (ST1 and ST2). But there will not exist real surround sound effect output, because
there is only stereo signal input, not digital.
57