49
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Automatic seek tuning start
(tape and CD changer operation)
When leaving the reception area of the
tuned in traffic programme station while
listening to a tape or CD, the system will
automatically start searching for a new TA
programme.
If no such station is found within approxi-
mately 30 seconds, tape or CD operation
will be stopped and a warning beep will
sound. To switch the warning beep off, pro-
ceed as described above.
Adjusting the volume for traffic
announcements and the warning
beep
This volume was preset at the factory,
though you can alter the value using the
DSC function (see “DSC programming, TA
VOL”).
Adjusting GEO for traffic
messages and the warning beep
You can separately adjust the balance and
fader settings for both traffic announcements
and the warning beep.
For example, it is possible to listen to traffic
reports via the front left (right) speaker only.
This provides the driver with the important
traffic information without bothering the rear
passengers too much.
To make a setting:
•
During an announcement, adjust the
balance and fader settings to suit your
personal preferences.
Köln RCM126 gb
13.06.2002, 11:18 Uhr
49
