Kingston DJ (wie Sydney RCM 85)
28
Tape operation
Inserting a tape
•
Turn on the set.
•
Insert a tape.
Insert tape with side A or 1
facing up, the open side facing
to the right
Eject tape
The tape will be played in the direction used
last.
If “TR1-PLAY” is displayed, this means that
track 1 or A of the tape is played.
Ejecting a tape
•
Press
.
The cassette will be ejected.
Fast winding
Fast forward
•
Press FF (fast forward).
At the end of the tape, the set will
switch to the other track and start play-
ing it.
To stop fast forward:
•
press FR.
Fast rewind
•
Press FR (fast rewind).
When the tape has been completely
rewound, the set will start playing the
same track again.
To stop fast rewind:
•
press FF.
Changing the track
Press simultaneously
TR1-PLAY or TR2-PLAY in the display
Fast forward
To stop:
press FR
Fast rewind
To stop:
press FF
Autoreverse
If, while a tape is playing, you wish to switch
to the other track of that tape:
•
press FR and FF simultaneously.
At the end of the tape, the set will automati-
cally switch to the other track. The display will
show “TR1-PLAY” for track 1 or A and “TR2-
PLAY” for track 2 or B.
Note:
If there is too much tension on the tape during
playback, the set may switch to the other
track by itself. In this case check the condition
of the tape. Sometimes it helps to rewind the
cassette tape completely.
Tape selection with MTL
Press the MTL button for optimal reproducti-
on when using metal or CrO
2
tape. “MTL” will
then light up on the display.
To switch the function on/off:
•
Press MTL.
Dolby B-NR*
With this set you can play cassettes recorded
with or without Dolby-B noise reduction.
Cassettes recorded with Dolby NR* distin-
guish by their reduced background noise and
the improved dynamic characteristics.
To switch Dolby on/off:
•
press
. When Dolby is on, “
” is indi-
cated on the display.
* Noise reduction system manufactured under license
from Dolby Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
