11
EN
GLISH
Switching on/off
There are various ways of switching the de-
vice on/off:
Switching on/off with the On/Off button
For switch-on, press the On/Off but-
ton
6
.
The device switches on.
To switch off the device, press and hold
down the On/Off button
6
for longer
than two seconds.
The device switches off.
Switching on/off using the vehicle
ignition
The device will switch on/off simultane-
ously with the ignition if the device is cor-
rectly connected to the vehicle’s ignition as
shown in the installation instructions and
you did not switch the device off by press-
ing the On/Off button
6
.
Switching the device off using the
detachable control panel
Detach the control panel.
The devices switches off after the time set
in the "OFF TIMER" menu.
Note:
To protect the vehicle battery, the de-
vice will switch off automatically after
one hour if the ignition is off.
쏅
쏅
쏅
Adjusting the volume
You can adjust the volume in increments
from 0 (off) to 66 (maximum).
To increase the volume,
turn the volume control
7
clockwise.
To decrease the volume,
turn the volume control
7
counter-
clockwise.
Setting the power-on volume
You can set the power-on volume.
Press the
MENU•OK
button
5
.
Press the or button
4
repeat-
edly until "ON VOLUME" appears on the
display.
Press the button
4
to open the
menu item.
Set the desired power-on volume with
the button or
4
.
To help you adjust the setting more easily,
the device will increase or decrease the vol-
ume as you make your changes.
If you set "LAST VOL" (setting 0 = LAST
VOL), the volume at which you were listen-
ing before power-off is activated again.
Note:
To protect your hearing, the power-on
volume is limited to the value "38" for
the setting "LAST VOL". If the volume
was higher before switch-off, the value
is automatically set to "38" at switch-
on. This prevents an unintentionally
and unexpectedly high volume when
switching on the device.
쏅
쏅
쏅
쏅
쏅
쏅
Switching on/off
Volume
01_KeyWestMP38_US_gb.indd 11
01_KeyWestMP38_US_gb.indd 11
11/13/07 2:22:33 PM
11/13/07 2:22:33 PM