06
Placing the device in operation | Radio
Placing the device in operation
Switching ON/OFF with the POWER button
Ÿ
To
switch-ON, press the [ ] button.
Ÿ
To switch-OFF, hold the [ ] button pressed for more than 2 seconds.
.
Volume
Adjusting the volume
You can adjust the volume in steps from 0 (off ) to 40 (maximum). Press the
button [ + ] to raise volume and [ – ] button to lower the volume.
Muting the car sound system (Mute)
Brie y press the [ ] button to mute the device or to reactivate the previous
volume.
Main menu
(Home)
In the main menu, press the buttons on the touchscreen to call up the different
sources and operating modes.
In the current source, press the [ ] button. The main menu is displayed.
1. Back
2. Enter main menu
3. Background application
4. Radio
5. Music
6. Bluetooth Phone
7. Setting
8. Clock time
9. Navigation
10. Video
11. File Explorer 12. Bluetooth Music
13. Equalizer
14. AUX
Ÿ
Swipe left on the screen to see more
source icons.
Note:
The gures used in these instructions
are intended to facilitate the explanations
and details may deviate from your device.5
Radio mode
Start radio mode In the main menu, press
the [ Radio ] button. The radio home screen
is displayed.
Select memory bank
Different memory banks and wavebands
are available. Up to 6 stations can be stored
in each memory bank.
Ÿ
Press the [ BAND ] button repeatedly
until the desired memory bank is
displayed. Tune into a station.
Tuning into stations manually
Ÿ
Brie y press the [<] or [ >] button to change the frequency in increments.
Ÿ
You can select broadcast frequency directly by dragging the red " | " in the
frequency display bar.
Starting station seek tuning
Ÿ
Hold the [<] or [ >] button to start station seek tuning. The radio tunes into the
next receivable station. Press again to stop seeking.
Note:
For reception area Europe: In FM waveband, only traffic information capable
stations are tuned into if the priority for traffic information is switched on.
1
2
3
5
8
4
6
7
9
10
13
11
14
12
