17
ENGLISH-GB
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
ENGLISH-US
Before uninstalling the IDC A09 and
using it with a different car radio, you
must first of all decode the IDC A09.
Decoding using a car radio that
has a key card
The master code is printed on your IDC
A09 pass card.
1. Switch on the radio.
2. Press the CDC button.
3. Press the IDC A09’s eject buttons
2+5 simultaneously, keep them
pressed for at least 1 second and
then release them.
The IDC A09 stops playing.
The red LEDs for all the eject buttons
begin to light up.
4. Switch off the radio.
5. Switch on the radio again.
The following appears briefly in the
display:
“
CDC CODE
”
The display then changes to:
“
0000
”
6. You can set digits 0-9 using the /
buttons.
You can move from one digit to the
next by pressing the << / >> buttons.
ENCODING
(AFTER INSTALLATION)
Activating the code for car
radios that have a fixed code
The master code is printed on your IDC
A09 pass card.
1. Switch on the radio.
2. Press the CDC button.
The following appears briefly in the
display:
“
CDC CODE
”
The display then changes to:
“
0000
”
3. You can enter the master code by
pressing the station buttons 1-4.
Example 4321:
a) Press station button 1 four times.
b) Press station button 2 three times.
c) Press station button 3 twice.
d) Press station button 4 once.
4. Once you have correctly entered the
complete numerical code, there are
two possible ways of confirming your
entry:
a) on car radios that have an “OK but-
ton”, confirm your entry by pressing
this button,
b) on car radios that do not have an
“OK button”, confirm your entry by
pressing the search button “ ”.
DECODING
(BEFORE REMOVAL)
