13
FRANÇAIS
ENGLISH
ESP
AÑOL
PORTUGUÊS
CD player operation
The CD player in this car audio system
can be used to play conventional mu-
sic CDs with a diameter of 12 cm.
Danger of damage to the CD
player!
CD singles with a diameter of 8 cm
and contour CDs (shape CDs) are
not suitable for use with this CD play-
er.
We assume no liability for any dam-
age done to the CD player resulting
from the use of unsuitable CDs.
Starting CD player operation
●
If there is no CD in the player,
➮
press
9
.
The flip release panel will open.
➮
Insert a CD into the player with the
label facing up until you feel resist-
ance. Do not use force.
The CD will be pulled into the player
automatically.
Do not attempt to assist or prevent this
process.
➮
Press the operating panel closed
gently until you feel it click into
place.
CD playback will begin.
●
If there already is a CD inserted
into the player,
➮
press CD•C
@
repeatedly until
“CD” appears in the display.
Playback will resume at the point where
it was interrupted.
Selecting tracks
➮
Press a key on the cursor block
:
to select the next or the previous
track.
Press
or
:
once to restart the
same track.
Audible fast forward/reverse
(CUE/REVIEW)
To start Cue or Review,
➮
press and hold down either or
:
until the process begins.
Playing tracks in random order
(MIX)
➮
Press 5 MIX
>
.
“MIX CD” will appear briefly in the dis-
play, the MIX symbol will light up in the
display. The next track played will be
selected at random.
Stopping the MIX function
➮
Press 5 MIX
>
again.
“MIX OFF” will appear briefly in the dis-
play and the MIX symbol will no longer
light up.
Scanning tracks (SCAN)
You can scan all of the tracks on the
CD.
➮
Press OK
;
for longer than two
seconds. Scanning will begin with
the next track.
Note:
It is possible to adjust the scan time.
For more information, read the section
on “Adjusting the scan time” in the chap-
ter on “Radio Operation”.
CD PLAYER OPERATION
