Blaupunkt HCO501, Руководство пользователя, Страница: 9 / 88

7
1. Body
2. Control panel with switches
2a. Switch 1 power (750 W)
2b. Switch 2 power (1250 W)
2c. Turbo fan switch
BEFORE FIRST USE
Screw the feet to the unit body as shown.
Position your heater on a level, stable and heat resistant surface.
OPERATING INSTRUCTIONS
Ensure switches are off and thermostat knob is turned to minimum. Connect the heater to the power
source.
Start the heater by adjusting the selected power with the switches:
- 750 W, first switch on, second switch off
- 1250 W, second switch on, first switch off
- 2000 W, first and second switch on
Turn the thermostat knob clockwise to the maximum position. When the room temperature
rises to a comfortable level, slowly turn the thermostat in the opposite direction
clockwise until the indicator light goes out. By turning the thermostat knob clockwise to
to increase the desired temperature, or to decrease the temperature, turn the knob to the left.
The heater will attempt to maintain the room temperature at the desired level by turning on and off.
To accelerate the heat distribution, switch on the fan.
To stop operation of the appliance and switch off the heater, set the switches to the "0" position and
the thermostat knob to the minimum position. Disconnect the product from the mains.
OVERHEATING PROTECTION
The radiator is protected with overheating protection which automatically switches off the appliance
if it intensely overheats. In that event, disconnect the appliance from the mains, wait approx. 30
minutes for the radiator to cool down, and rectify any possible cause of the overheating, e.g.,
something covering the radiator. Check the appliance, cable, and plug for damage. If no damage is
observed, reconnect the appliance and switch it on, according to the manual. If the radiator does not
switch on, contact the customer service for assistance.
CLEANING AND MAINTENANCE
During use, clean the appliance regularly according to the following instructions.
1. Disconnect the appliance from the power source, and let it cool down before cleaning.
2. Gently clean the appliance's external surface and control panel with a damp and lint-free cloth.
3. If there is dust in the appliance's slots, it is recommended to blow it out with a vacuum cleaner or
blower.
4. Do not use strong detergents, chemical cleaners, or solvents.
HCO501
3. Thermostat knob
4. Handles
5. Feet
6.
Set of screws for foot mounting