33
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
Selecting the memory bank
To switch between the FM memory
banks and the MW and LW wavebands,
➮
keep pressing the BND•TS button
<
until the required waveband /
memory bank is displayed.
Tuning into a station
There are various ways of tuning into a
station.
Automatic seek tuning
➮
Press the or button
9
.
The unit tunes into the next receivable
station.
Setting the sensitivity station
seek tuning
You can configure the radio to only tune
into stations with a strong reception or
to also tune into those with a weak re-
ception.
➮
Press the MENU button
7
.
➮
Keep pressing the or button
5
until “SENS” appears in the dis-
play.
➮
Press the or button
5
.
The display shows the currently set val-
ue for sensitivity. “SENS HI6” means
that the tuner is highly sensitive. “SENS
LO1” means it is set to the lowest sen-
sitivity setting.
If “SENS LO” is selected, “lo” lights up
in the display.
➮
Set the required sensitivity using
the and buttons
5
.
➮
Press the MENU button
7
.
Tuning into stations manually
You can also tune into stations manual-
ly.
Note:
●
You can only tune into stations
manually if the RDS function is de-
activated.
➮
Press the or button
5
.
Browsing through broadcasting
networks (only FM)
If a radio station provides several pro-
grammes, you have the option of brows-
ing through its so-called “broadcasting
network”.
Note:
●
If you want to use this feature, the
RDS function must be activated.
➮
Press the or button
5
to
switch to the next station on the
broadcasting network.
When using this feature, you will only
be able to switch to stations that you
have received once already. To do so,
use either the Travelstore function or
allow the automatic seek tuning feature
to run once through the entire frequen-
cy range.
RADIO MODE
