Blaupunkt Competence Center Security
Security Brand Pro GmbH
Mondstrasse 2-4
85622 Feldkirchen, Germany
E-Mail: [email protected]
www.blaupunkt.com/service
Follow the instruction in this document to setup and use the accessory.
For further setting and operation details, please visit the Blaupunkt website
http://www.blaupunkt.com/service
to download the complete manual.
DG4-Pro
4G GSM Dongle
EN | GSM Dongle
10.
USB
11.
Micro SIM Card
compartment
12.
Blue LED (inside casing)
DE | Funk-
DE | GSM Dongle
13.
USB
14.
Micro SIM Card
compartment
15.
Blue LED (inside casing)
FR | GSM Dongle
16.
USB
17.
Micro SIM Card
compartment
18.
Blue LED (inside casing)
EN
Follow instruction in this document to setup and use the accessory. For
further setting and operation detail, please visit Blaupunkt website
service.blaupunkt-security.com
to download the complete manual.
Use Case of the DG4-Pro GSM:
If the GSM dongle is installed and there is an Internet breakout (e.g. an
intruder disconnect the router or cut off the complete energy of the
home) the Q-Pro Hub with its internal back up battery and this GSM
dongle will send a push notification to alert each user of the Internet
failure. With the DG4 GSM dongle the Q-Pro Alarm System can also
alert the user for any event while the router is offline.
Additionally with
the DG4-Pro it is possible to manage the alarm system completely
without any router. Please assure that there is 4G network on the
installation location.
Note:
The GSM dongle does not provide GSM backup for the video
camera IPC-S1. For image verification while the network is offline we
recommend the use of PIR with cameras (e.g. IRC-S2 or IRC-P4).
The DG4-Pro works on 4G high speed network and can be used as
backup for alarm notifications and standard App management. We
recommend to use this GSM dongle for areas where there is 4G
communication.
Getting Started
4.
Search for a telecom provider with good signal strength on the
installation location.
5.
Acquire a Micro SIM size card from your selected Telecom
Provider. The Micro SIM Card needs to have mobile internet data
available, there is no need for SMS or mobile airtime. The amount
of internet data needed will change depending its usage, for
backup usage 100Mb is enough.
6.
Ask the telecom provider to disable the PIN code from the Micro
SIM Card. Alternative insert the Micro SIM card on your
smartphone and disable the PIN code.
Installation
7.
Power OFF the Q-Pro HUB by switching the Q-Pro HUB battery
switch to OFF and unplugging the AC adaptor.
8.
Insert the Micro SIM Card into the Micro SIM Card Compartment
located at the side of the GSM Dongle. . (Refer to the picture point
2).
9.
Install the GSM Dongle into the USB port located at the back of the
Q-Pro Hub.
10.
Power ON the Q-Pro HUB by switching the Q-Pro HUB battery
switch to ON and plugin in the AC adaptor.
11.
The dongle’s Blue LED will light up.
12.
After the installation wait for a couple of minutes until the GSM
dongle receives signal properly.
•
If the GSM dongle or the SIM Card are removed the Q-Pro will light
up the failure LED and send a notification via the Ethernet cable.
To install the Micro SIM card or the dongle back power OFF the
panel first.
•
If the installation of the Micro SIM card or GSM dongle is done
while the panel is powered ON they won’t be detected properly
and GSM system won’t work.
Access Point Name (APN) configuration
6.
Go to the Web Interface
https://eu.bphomeconnect.com/BP/
and
login to your Q-Pro Hub. Go to Settings
→
Panel
→
Panel
→
GSM
7.
For some telecom providers the Q-Pro Hub would fill-up the APN
settings automatically. Check that the APN settings are filled
up. If there are refer to step 5, if not refer to step 3.
8.
Click “Overridden by HPS” checkbox and set up the APN settings
manually. Ask your telecom provider for your APN settings:
“APN name”, “username” and “password”.
9.
Click submit to save the changes.
10.
At the “RSSI” field check that the GSM signal strength signal is 6 or
above. If the signal is below 6 try another location for the Q-Pro
or test with other telecom provider.
•
If GSM signal is not detected: APN settings might be outdated.
Please refer to step 3.
Select the desired communication method:
3.
Go to the Web Interface go to Settings
→
Panel
→
Panel
→
Internet Communication
4.
Option 1:
Select “Ethernet & GSM” to work via the router as your
main communication method and GSM only as backup in case
router doesn’t work.
Option 2:
Select “GSM” to work only with the dongle as your
communication method. (Recommended only for DG4-Pro, as it
has a stronger band width)
Frequency:
850/900/1800/1900MHz
DE
Follow instruction in this document to setup and use the accessory.
For further setting and operation detail, please visit Blaupunkt website
service.blaupunkt-security.com
to download the complete manual.
Use Case of the DG4-Pro GSM:
If the GSM dongle is installed and there is an Internet breakout (e.g.
an intruder disconnect the router or cut off the complete energy of the
home) the Q-Pro Hub with its internal back up battery and this GSM
dongle will send a push notification to alert each user of the Internet
failure. With the DG4 GSM dongle the Q-Pro Alarm System can also
alert the user for any event while the router is offline.
Additionally with
the DG4-Pro it is possible to manage the alarm system completely
without any router. Please assure that there is 4G network on the
installation location.
Note:
The GSM dongle does not provide GSM backup for the video
camera IPC-S1. For image verification while the network is offline we
recommend the use of PIR with cameras (e.g. IRC-S2 or IRC-P4).
The DG4-Pro works on 4G high speed network and can be used as
backup for alarm notifications and standard App management. We
recommend to use this GSM dongle for areas where there is 4G
communication.
Getting Started
7.
Search for a telecom provider with good signal strength on the
installation location.
8.
Acquire a Micro SIM size card from your selected Telecom
Provider. The Micro SIM Card needs to have mobile internet data
available, there is no need for SMS or mobile airtime. The amount
of internet data needed will change depending its usage, for
backup usage 100Mb is enough.
9.
Ask the telecom provider to disable the PIN code from the Micro
SIM Card. Alternative insert the Micro SIM card on your
smartphone and disable the PIN code.
Installation
13.
Power OFF the Q-Pro HUB by switching the Q-Pro HUB battery
switch to OFF and unplugging the AC adaptor.
14.
Insert the Micro SIM Card into the Micro SIM Card Compartment
located at the side of the GSM Dongle. . (Refer to the picture
point 2).
15.
Install the GSM Dongle into the USB port located at the back of
the Q-Pro Hub.
16.
Power ON the Q-Pro HUB by switching the Q-Pro HUB battery
switch to ON and plugin in the AC adaptor.
17.
The dongle’s Blue LED will light up.
18.
After the installation wait for a couple of minutes until the GSM
dongle receives signal properly.
•
If the GSM dongle or the SIM Card are removed the Q-Pro will
light up the failure LED and send a notification via the Ethernet
cable. To install the Micro SIM card or the dongle back power
OFF the panel first.
•
If the installation of the Micro SIM card or GSM dongle is done
while the panel is powered ON they won’t be detected properly
and GSM system won’t work.
Access Point Name (APN) configuration
11.
Go to the Web Interface
https://eu.bphomeconnect.com/BP/
and
login to your Q-Pro Hub. Go to Settings
→
Panel
→
Panel
→
GSM
12.
For some telecom providers the Q-Pro Hub would fill-up the APN
settings automatically. Check that the APN settings are filled
up. If there are refer to step 5, if not refer to step 3.
13.
Click “Overridden by HPS” checkbox and set up the APN settings
manually. Ask your telecom provider for your APN settings:
“APN name”, “username” and “password”.
14.
Click submit to save the changes.
15.
At the “RSSI” field check that the GSM signal strength signal is 6
or above. If the signal is below 6 try another location for the
Q-Pro or test with other telecom provider.
•
If GSM signal is not detected: APN settings might be outdated.
Please refer to step 3.
Select the desired communication method:
5.
Go to the Web Interface go to Settings
→
Panel
→
Panel
→
Internet Communication
6.
Option 1:
Select “Ethernet & GSM” to work via the router as your
main communication method and GSM only as backup in case
router doesn’t work.
Option 2:
Select “GSM” to work only with the dongle as your
communication method. (Recommended only for DG4-Pro, as it
has a stronger band width)
Frequency:
850/900/1800/1900MHz
FR
Follow instruction in this document to setup and use the accessory. For
further setting and operation detail, please visit Blaupunkt website
service.blaupunkt-security.com
to download the complete manual.
Use Case of the DG4-Pro GSM:
If the GSM dongle is installed and there is an Internet breakout (e.g. an
intruder disconnect the router or cut off the complete energy of the home)
the Q-Pro Hub with its internal back up battery and this GSM dongle will
send a push notification to alert each user of the Internet failure. With the
DG4 GSM dongle the Q-Pro Alarm System can also alert the user for any
event while the router is offline.
Additionally with the DG4-Pro it is
possible to manage the alarm system completely without any router.
Please assure that there is 4G network on the installation location.
Note:
The GSM dongle does not provide GSM backup for the video
camera IPC-S1. For image verification while the network is offline we
recommend the use of PIR with cameras (e.g. IRC-S2 or IRC-P4).
The DG4-Pro works on 4G high speed network and can be used as
backup for alarm notifications and standard App management. We
recommend to use this GSM dongle for areas where there is 4G
communication.
Getting Started
10.
Search for a telecom provider with good signal strength on the
installation location.
11.
Acquire a Micro SIM size card from your selected Telecom
Provider. The Micro SIM Card needs to have mobile internet data
available, there is no need for SMS or mobile airtime. The amount
of internet data needed will change depending its usage, for backup
usage 100Mb is enough.
12.
Ask the telecom provider to disable the PIN code from the Micro
SIM Card. Alternative insert the Micro SIM card on your smartphone
and disable the PIN code.
Installation
19.
Power OFF the Q-Pro HUB by switching the Q-Pro HUB battery
switch to OFF and unplugging the AC adaptor.
20.
Insert the Micro SIM Card into the Micro SIM Card Compartment
located at the side of the GSM Dongle. . (Refer to the picture point
2).
21.
Install the GSM Dongle into the USB port located at the back of the
Q-Pro Hub.
22.
Power ON the Q-Pro HUB by switching the Q-Pro HUB battery
switch to ON and plugin in the AC adaptor.
23.
The dongle’s Blue LED will light up.
24.
After the installation wait for a couple of minutes until the GSM
dongle receives signal properly.
•
If the GSM dongle or the SIM Card are removed the Q-Pro will light
up the failure LED and send a notification via the Ethernet cable.
To install the Micro SIM card or the dongle back power OFF the
panel first.
•
If the installation of the Micro SIM card or GSM dongle is done while
the panel is powered ON they won’t be detected properly and GSM
system won’t work.
Access Point Name (APN) configuration
16.
Go to the Web Interface
https://eu.bphomeconnect.com/BP/
and
login to your Q-Pro Hub. Go to Settings
→
Panel
→
Panel
→
GSM
17.
For some telecom providers the Q-Pro Hub would fill-up the APN
settings automatically. Check that the APN settings are filled up.
If there are refer to step 5, if not refer to step 3.
18.
Click “Overridden by HPS” checkbox and set up the APN settings
manually. Ask your telecom provider for your APN settings:
“APN name”, “username” and “password”.
19.
Click submit to save the changes.
20.
At the “RSSI” field check that the GSM signal strength signal is 6 or
above. If the signal is below 6 try another location for the Q-Pro
or test with other telecom provider.
•
If GSM signal is not detected: APN settings might be outdated.
Please refer to step 3.
Select the desired communication method:
7.
Go to the Web Interface go to Settings
→
Panel
→
Panel
→
Internet
Communication
8.
Option 1:
Select “Ethernet & GSM” to work via the router as your
main communication method and GSM only as backup in case
router doesn’t work.
Option 2:
Select “GSM” to work only with the dongle as your
communication method. (Recommended only for DG4-Pro, as it has
a stronger band width)
Frequency:
850/900/1800/1900MHz
