Blaupunkt CR10ALU, Руководство пользователя

Страница: 6 / 96

4
Control locations
1-down button, 2- radio button, 3-alarm 1-2/on-off button, 4- snooze/dim button,
5- set button, 6- volume button, 7- up button, 8- FM antenna,
9- DC 5V jack, 10-backup cell battery compartment.
Installation
Plug the AC/DC adaptor to an AC household outlet, and then plug the DC jack to the back of the
unit. Your clock radio is ready to work for you.
Back up battery installation
Your clock radio requires one CR2032 lithium battery (not included) to provide backup power to
the clock in the event of a temporary power interruption.
1. Pull out the cell battery cover on side of unit by your fingers; install one fresh CR2032 lithium
battery into the battery bracket according to en/- polarity.
2. Push back the battery bracket into the compartment together the installed battery.
If AC power interrupted, the LED display will go off and both the radio and the alarm will not
function. The backup battery will keep the time and all settings of your unit. Make sure a fresh
CR2032 lithium battery is used. A fresh CR2032 battery could backup your clock continuously for
around 3 days.
Setting time, 12/24HR time and the snooze duration
1. Press set once, the hour digits flash. Press up or down button to set the current hour (hold to
advance rapidly).
2. Press set again, the minute digits flash. Press up or down button to set minutes. (hold to
advance rapidly).
3. Press set again, the display shows “24H” and flashes. Press up or down button to select “12H” or
“24H” time format.
4. Press set again, the display shows “05” and flashes. Press up or down button to select your
snooze time from 5 to 60 minutes.
5. Press set again or if no key is pressed in approx. 10 seconds to exit the setting mode.
Note: when 12-hour time format is selected, the PM/AM LED will appear at the display to indicate
the time
。
Setting the alarms
1. Press alarm 1-2 button once, the alarm1 clock icon and the hour digits flash. Press up or down
button to set the alarm 1 hour. (hold to advance rapidly).
2. Press alarm 1-2 button again to adjust minutes. Press up or down button to set the alarm 1
minutes. (hold to advance rapidly).
3. Press alarm 1-2 button again, LED displays “OFF” (alarm off ). To select wake to sound sources,
press up or down button to select :