Blaupunkt COSTA MESA 900, Руководство по эксплуатации

Страница: 13 / 33

Navigation Function | Phone Feature
Navigation setting:
Several settings are available to may your ride safer and
comfortable. Like the Speed alert and the safety
camera alert. Please keep them checked for a good
ride. You can also deactivate the options by
unchecking them.
In case of error
In normal condition, the error of satellite signal
reception is about 7 meters, while in several situations,
some error may still occur after the auto-correcting of
the software, at these moments, the driver should pay
attention to the road condition and drive according to
the actual road condition.
Note: Using environment of navigation
system can be complicated and varying, the
system operation may have some issues (such
as failing to enter the map interface, no image
e t c . ) w h e n e n c o u n t e r e d b y a l a r g e
electromagnetic disturbance. It will require a
re-start operation to deal with these issues.
Phone Feature
Please be aware that using a hand-held phone while
driving is an offence. You can use this device to make &
receive call hands-free. However, it is suggested to
make minimal use of this feature & talk only when in
great need of talking to someone. Talking while driving
may divert your attention from traffic conditions
ahead.
Making a call via Bluetooth
For the rst time to pair the mobile and the unit, it is
required to operate as below instructions:
Ÿ
Turn the Bluetooth of the mobile on;
Ÿ
Search the Bluetooth device with the mobile or the
unit, and connect - Device name is C900;
Ÿ
A prompt message will show on the mobile, input
the password 0000 and Con rm on the mobile;
Ÿ
After pairing successfully, the system will enter the
interface below:
ü
After the unit is powered off and on, the Bluetooth
o f t h e u n i t w i l l co n n e c t t h e m o b i l e l a s t
disconnected.
ü
After pairing successfully, the icon [
Å
] showing the
connecting status on the upper-right corner of the
screen will turn White.
ü
Device name and the pin to connect is available on
the interface
lt is required to turn on the function "Visible to
all nearby Bluetooth devices" on the mobile,
and then the unit will be able to nd the
mobile Bluetooth device.
13