10
To select the cameras
➮
keep pressing the
CAM
button on
the CCU01 until the required
camera is displayed.
The order is as follows:
CAM1>CAM2>CAM3.
If the
CAM
button is pressed once more,
the initial signal (video or TravelPilot) will
be displayed again.
Switching source in the cabin
The video signal (video and DVD
player), the TravelPilot map and the
picture from the observation camera
(camera 3) can be displayed on the
monitors in the cabin.
To switch on the monitors
➮
on the CCU01, press the CABIN
VIDEO
or
MAP
button.
To switch between video and map
display
➮
press the
MAP
button on the
CCU01.
The source is switched to the
observation camera using a separately
installed switch that is connected to Plug
III, Pin 4 (5 V - 24 V).
Note:
Camera 3 has priority over the video and
the map display.
Menu settings
Picture settings on the CLX01 can be
adjusted separately for the video mode
(camera, video source) and the
TravelPilot mode.
In video mode, you can adjust bright-
ness, contrast, colour, picture sharp-
ness, format and system; and in
TravelPilot mode, brightness, contrast,
format and system.
In the
FORMAT
menu, you can choose
between
NORMAL
,
CINEMA,
FULL
and
WIDE
.
CONTROLS AND SETTINGS
Settings in video mode
➮
On the CCU01, switch to COCK-
PIT
VIDEO
or
CAM
.
To select a function
➮
Keep pressing the
MENU
button
until the required menu item
appears.
To adjust the function
➮
press the or button on the
monitor.
NORMAL
Input 4:3
CINEMA
Input 16:9
FULL
Input 4:3
WIDE
Input 4:3
BA CLX01 gb, S.8-11
23.07.2004, 11:23 Uhr
10
