Blaupunkt CL 10, Инструкция по эксплуатации

Страница: 30 / 32

CL 10
Reset
- If the clock is dead (the display doesn’t work) during setting, please
use a slim but blunt object (like ball pen pointer, toothpick etc.) to
press RESET hole (4), then the clock will return to the initial mode.
Backlight
- Press SNZ (SNOOZE) key (1) on the top of the clock at any time, the
backlight will be lightened.
Maintenance
- The batteries should be replaced if the display screen or alarm
becomes dysfunctional or weak.
- Please use a soft cloth or a paper towel to clean the clock.
- Do not use any corrosive cleanser or chemical solutions on the
clock.
Battery Information
- The batteries must not be exposed to excessive heat such as
sunshine, fire or the light.
- The batteries should be drawn to the environmental aspects of
battery disposal.
- Battery usage CAUTION - to prevent battery leakage which may
result in body injuries, property damage, or damage to the
apparatus:
Install all batteries correctly, + and - as marked on the apparatus.
Do not mix batteries (old and new or carbon and alkaline, etc.)
Remove batteries when the unit is not used for a long time.