Specifications
Audio Power Specifications
Power Output and Total Harmonic Distortion: 13.5 watts per channel minimum continuous average
output into 4 ohms, 4 channels driven, from
Hz with no more than 1% total harmonic
distortion.
Other
Tuner
FM
Tuning Range:
Intermediate Frequency:
FM Mono Sensitivity:
Seek lo sensitivity:
Seek sensitivity
Selectivity:
Signal-to-Noise Ratio:
Harmonic distortion at 1
Separation:
Frequency Response:
AM
Tuning Range:
Seek lo sensitivity
Seek sensitivity:
Intermediate Frequency:
Signal-to-Noise
Frequency Response:
Audio
Speaker Impedance:
Maximum Amp Power:
RMS Power:
Bass Control:
Treble Control:
Loud:
Preamp Output:
Cassette
Signal-to-Noise Ratio:
with Dolby B Noise Reduction:
Tape Wow and Flutter:
Tape Frequency Response:
General
Dimensions (w/o projecting parts/controls):
Mass:
Power Requirement (neg. grnd.):
Operating Temperature:
Supplied Accessories:
Optional Accessories:
87.5 107.9 MHz
10.7 MHz
13
51
31
80
at 400kHz
65
(stereo), 70
(mono)
0.7% (stereo), 0.5% (mono)
30
30-l 5,000 Hz 3
530 1,710
50
30
450
50
Hz 3dB
4-8 ohms
4 X 35 Watts (at 4 ohms)
4 X 13.5 Watts (at 4 ohms)
THD
10
100 Hz
10
10
+ 8
60 Hz + 2
8
3.0 Volt Preamp Output (Max.
THD)
4-Channel. Low-lmpendance (100
Preamplifier
55
65
0.10%
30-l 8,000 Hz 3
180 x 52 x 155 mm, 7 x 3 x
in.
Approx. 1.4 kg (3.0 lb.)
12 V DC car battery (1 l-16 V DC allowable)
15°F to
-10°C to 50°C
l
Unit
l
Faceplate
l
Wire Harness, including
RCA Preamp Output
Harness
l
DIN Sleeve
l
Mounting Hardware
l
Owner’s Manual in English, French, Spanish and Portuguese
l
4-Channel Preamp Output Harness (Part No. 8634494218)
Design and specifications subject to change without notice.
11