Blaupunkt CANBERRA CM 84, Руководство по эксплуатации

Страница: 10 / 16

23
Canberra CM 84
DE
UT
S
C
H
EN
GLI
S
H
IT
A
L
IANO
POR
T
UG
UE
S
NE
DE
RL
AND
ESP
A
GÑ
OL
SVEN
SK
A
F
RANÇAI
S
Storing the strongest stations
automatically with Travelstore
You can use the Travelstore memory bank to
automatically store the six strongest FM sta-
tions sorted on the preset buttons according
to their signal strength. This feature is
especially useful when travelling, because it
will always give you the most powerful stati-
ons at a fingertip as you pass through the
various reception areas.
•
Press FM•T for at least 2 seconds.
The radio will seek the most powerful FM
stations and store them on the “T” memory
bank (Travelstore). As soon as this procedu-
re has finished, the first station will be played.
FM stations can also be stored manually on
the Travelstore bank (see “Storing stations”).
Recalling stored stations
You can recall any stored station by pressing
the corresponding preset button.
• Use the FM•T or M•L button to select a
waveband. Select the desired memory
bank to recall FM presets.
For this purpose, press FM•T until the
desired memory bank is indicated on
the display.
• Briefly press the corresponding preset
button.
Stereo - mono switch (FM)
You can switch to mono when the reception
quality becomes poor:
•
Press lo for approximately 2 seconds.
During mono reception the stereo sym-
bol
on the display will go out.
Each time the car radio is switched on, the
radio will automatically be set to stereo recep-
tion.
It will automatically shift to mono when the
reception quality becomes poor.
Changing the memory bank (FM)
You can shift between the memory banks I, II,
III and T to store and recall preset stations.
The selected memory bank is indicated on the
display.
•
Press FM•T until the desired memory
bank lights up on the display (press
repeatedly if necessary).
Storing stations
Using the preset buttons 1, 2, 3, 4, 5, 6 you
can store six stations on each FM memory
bank (I, II, III, T).
On MW and LW, you can store six stations
each.
• Select the waveband by pressing FM•T
or M•L. To store FM stations, press the
FM•T button to select one of the FM
memory banks.
• Use the rocker switch to tune to a stati-
on (either automatically or manually).
• Press the desired preset button and
hold it down. The radio will be muted
and resumes play after approximately
2 seconds. The system will also send
out a beep tone.
Now the station is stored.
The activated preset button is indicated on
the display.
Note:
If you tune into a station which has already
been stored, the corresponding preset but-
ton and the memory bank will start flashing
on the display for a short while.