Blaupunkt BT 55e, Инструкция по эксплуатации

Страница: 31 / 37

BT 55e
BASIC FUNCTION
Turn on the unit
Slide the rear panel Power knob (16) to ON position. The LED display (13) will flash on
as below.
Select play source
Press Source button (1) to turn on and select BLUETOOTH/RADIO/USB or LINE IN play
mode. Press and hold the source button, the unit will power off.
Note:
a. The unit will go to STANDBY mode automatically after 15 minutes if there is no play
mode selection, meanwhile, the LED display will turn off. You can press the source
button to resume the unit.
b. On Bluetooth, USB and Line in mode, if there is no music signal input to the
speaker lasting 15 minutes, the unit will go to standby mode automatically. And the
LED display will turn off totally after another 15 minutes in order to save power and
perform the ERP 2 requirement. You can press the source button to resume the
function operation.
Adjust Volume
Press (6) up or VOLUME – (5) down to increase or decrease volume.
POWER AND CHARGING OPERATION
The boombox can operate with the built-in rechargeable battery. To charge the
built-in battery, please reference as below:
· Insert the one end of supplied USB cable to the micro USB charge port (18 ) on the
rear panel of the unit, and the another terminal shall be connected with universal
USB power source like laptop PC etc..
· When the unit starts to charge, the front LED indicator (12) will light on in yellow
color; the front LED indicator (12) will turn off after the battery is fully charged.
·
The battery fully charging time is about 3-5 hours.
· When you do not want to listen music during a long time, we suggest you to slip
the rear panel power knob (16) to OFF position in order to save battery power.
STANDBY MODE
31