background image

54

THEFT PROTECTION

Press the 

 button 

2

.

The control panel latch mechanism
opens.

First, pull the control panel straight
off the unit and then out towards
the left.

The unit switches off after the con-
trol panel is removed.

All the current settings are saved.

Any CD already inserted in the unit
remains there.

Safety information

 Risk of injury! Never remove the

release panel whilst the control pan-
el is opened out. You might injure
yourself on the protruding metal parts
of the release panel holder fitting.

Attaching the control panel

Slide the control panel from left to
right into the unit’s guide.

Press the left edge of the control
panel into the unit until it clicks into
place.

Note:

When attaching the control panel,
make sure you do not press the
display.

Theft protection

Removable control panel

As a way of protecting your car radio
against theft, the unit is equipped with
a removable control panel (flip-release
panel). Without this control panel, the
car radio is worthless to a thief.

Protect your equipment against theft by
taking the control panel with you every
time you leave your vehicle. Do not
leave the control panel in your vehicle -
not even in a hiding place.

The control panel has been designed
to be easy to use.

Notes:

Never drop the control panel.

Never expose the control panel to
direct sunlight or other heat sourc-
es.

Store the control panel in the sup-
plied case.

Avoid making direct skin contact
with the control panel’s contacts. If
necessary, clean the contacts with
a lint-free cloth and some alcohol.

Detaching the control panel

2

Содержание Bremen CD72


















































Отзывы: