Blaupunkt BR-70DABB, Инструкция по эксплуатации

Страница: 14 / 20

14
BASIC OPERATION (CONT.)
AM Radio Mode
If you are not already in AM mode, press and release the Mode button to go to AM mode
(check the display). There are 20 memory presets for AM radio. The operation for presetting
stations and recalling a preset in AM mode is same as DAB/FM modes.
If you were listening to an AM station when you switched the Radio off then this station
will be automatically selected when you switch the Radio back on.
Tuning to an AM station
•
Press and hold the ENTER/DISP button to scan up the frequency band.
Note: If reception is still poor try moving the radio to another location otherwise
please place the unit as far as you can away from power adaptor and power outlet
position, this can help avoid noise interference.
Storing an AM station preset
Your Radio can store up to 20 AM radio stations in its preset memories for instant access to
your favourite stations.
1.
Tune the Radio to the AM radio station that you wish to preset.
2. Press and hold the PRESET button for approximately 2 seconds until Preset Store
<1:(Empty)> is displayed if no previous station has been stored.
3. Use the arrow buttons to scroll to the preset location that you would like to store the
radio station to (1-20).
4. Press the Enter button to confirm Preset X stored, where ‘X’ is the
number of the preset (1-20), will be displayed.
Note: If there is already an existing AM station stored under a preset, it will be over
written when you store the new station.
Sleep
System menu scroll to <Sleep>. Press ENTER (13) and use the and buttons to select to
see
Sleep options:
Sleep off or a delay of 15, 30, 45, 60 or 90 minutes.
Press ENTER (13) to choose an option. Press MENU (10) (twice) to exit Sleep,
an SL Sleep icon will appear in the upper right of the display under the Battery icon