BP-USC02
4
3. General Guidelines
•
All modifications of the device are forbidden for safety reasons. Damage caused by
user modifications to the device is not covered by the warranty.
•
Only use the device for its intended purpose. Using the device in an unauthorised
way will void the warranty.
•
Damage caused by disregard of certain guidelines in this manual is not covered by
the warranty and the dealer will not accept responsibility for any ensuing defects or
problems.
•
Nor Velleman nv nor its dealers can be held responsible for any damage
(extraordinary, incidental or indirect) – of any nature (financial, physical…) arising
from the possession, use or failure of this product.
•
Keep this manual for future reference.
4. Overview
Refer to the illustrations on page 2 of this manual.
1
lid
3
on-off switch
2
tank
4
shell
5. Operation
Principle
Ultrasonic cleaning is based on the cavitation effect, caused by the vibration of high-
frequency ultrasonic waves in the liquid.
As microscopic bubbles are formed, these implode and cause cavitation. This cavitation
creates an intense scrubbing action on the surface of the item being cleaned. The bubbles
are small enough to penetrate microscopic crevices, cleaning them thoroughly and
consistently.
Ultrasonic cleaning is extremely effective in removing dirt and grime, which would
normally require tedious manual cleaning. Use an ultrasonic cleaner to clean a wide
variety of instruments and mechanical parts, returning them to almost brand new
condition without damage to delicate parts.
General operation
1.
Open the lid and fill the tank with water. Running the cleaner without water will
damage the appliance. Do not exceed the MAX mark.
2.
Put the item to be cleaned in the water and make sure it is completely immersed.
BP-USC02.indd 4
30/10/2019 12:15:18
