BP Car Phone 3.0 C User Manual
28
9.8.1 Message center number
Select
MENU > SETTINGS > SMS SETTINGS > SMS CENTER
if you need to change the phone
number of the service center, as given by your service provider. Enter the number using the keypad and
confirm with
OK
.
9.8.2 Saving an SMS message after sending
If you want to automatically save an SMS message to the SMS archive after it has been sent select
MENU > SETTINGS > SMS SETTINGS > SAVE SMS AFTER SENDING
and choose
ON
or
OFF
.
9.9 Internet
To configure GPRS access to your service provider’s website select
MENU > SETTINGS > INTERNET
.
Enter individual parameters in the following menus. Then confirm them with
OK
.
MCC/MNC
Enter mobile country code / mobile network code
APN
Access point name
LOGIN
Username
PASSWORD
User password
TIP:
If needed, contact your service provider for these details.
The access data of the following service providers are already saved on the device:
Provider
MCC/MNC
T-Mobile D
26201
Vodafone D2
26202
E-Plus
26203
o2 Germany
26207
SFR
20810
Bouygues Télécom
20820
Orange
20801
P+T Luxembourg
27001
9.10 Clock
To activate the internal clock select
MENU > SETTINGS > CLOCK
. Choose the display mode (
12
HOURS
or
24 HOURS
) and set the clock using the keypad.
The clock display starts 10 seconds after opening the main display. The time is merged in where the
service provider is displayed. When changing cells or switching to another network (roaming), the
current service provider is displayed for 10 seconds.
The clock is automatically synchronized when receiving a message or when a GPS signal is available.
NOTE:
If you have a BP Car Phone 3.0 C with an integrated GPS module, you only need to set the time
once with a valid GPS signal so that the time difference to Universal Time is correctly set.
