17
ACR 4251 GB
ENGLISH
DEUTSCH
FRAN
Ç
AIS
ITALIANO
NEDERLANDS
SVENSKA
ESPA
Ñ
OL
PORTUGU
Ê
S
Tape operation:
TR I PLAY
- Side 1 (or 2)
CASS << >> - Fast forward/rewind
>
Station tuning – automatically, if “m”
has disappeared from
the display.
– manual, if “m” lights
up in the display.
Toggle by pressing the lo button.
?
Code LED
Flashes for additional theft protection
when the ignition has been switched
off.
Important notes
Precautions
Before starting to use your new car radio,
please read the information on “Traffic safe-
ty” and “Anti-theft protection” carefully.
Traffic safety
As the driver of a motor vehicle, it is your
responsibility to pay attention to the traffic
situation at all times. Never use your car radio
in a way that could distract you.
Please keep in mind that you travel a dis-
tance of 14 m per second at a speed of only
50 km/h.
Should the traffic situation become particu-
larly demanding, we advise you not to use the
radio.
Always make sure that you are still able to
hear any warning signals coming from out-
side of the vehicle, such as police or fire
engine sirens, so that you can react accord-
ingly.
Therefore, you should always select a moder-
ate volume for playing your car radio while
you are driving.
QuickOut
This unit is available with or without the
“QuickOut” (quick release) option.
The QuickOut handle facilitates removal of
the car radio from its bracket which enables
you to carry it out anywhere. The memory of
the preset buttons is maintained also for long
periods of time.
If you wish to remove the unit:
•
Press button “a” and pull handle “b”
firmly.
If you wish to resume radio or cassette op-
eration:
•
Push the unit into the bracket as far as
it will go and lock the handle into place
on the front plate.
Operation of the car radio can begin as long
as the security coding system is switched off.
If the coding system is active, proceed as
described in the chapter “Switching on secur-
ity coding” each time the unit is reinserted.
Installation/Connection
If you would like to install this equipment
yourself or add any new components, please
carefully read the installation and connection
instructions following the appendix.
Do not ground the loudspeaker outputs!
Use only the accessory and replacement
parts approved by Blaupunkt.