17
ACD 9430
DE
UT
S
C
H
EN
GLI
S
H
IT
A
L
IANO
POR
T
UG
UE
S
NE
DE
RL
AND
ESP
A
GÑ
OL
SVEN
S
KA
F
RANÇAI
S
2 secs. but less than 8 secs., the set swit-
ches over to stereo and the stereo-symbol (h)
lights up in the display.
When the car radio is switched on it is always
in stereo mode.
Memorizing a Station
You can memorize two FM stations with each
of the preset buttons
:
. Display
9
a, b
either indicates the FM storage level (“FM”)
or the Travelstore level (“T”).
To memorize a station:
Tune in the desired broadcaster (see chapter
Tuning in a Station Automatically/Manual
Tuning) first. Now press one of the preset
buttons
:
until the radio resumes play (ap-
prox. 2 seconds). The station is now stored.
Note:
If you tune to an FM station already stored on
the storing levels FM or Travelstore, the
coresponding storing level and the preset
button will flash in the display.
Automatically Storing the Stron-
gest Stations
(Travelstore)
With Travelstore, you have the opportunity to
automatically store the 5 strongest FM stati-
ons of your respective area and have them
sorted according to their signal strength. The
strongest station is then stored on preset
button 1, the second strongest on preset
button 2, etc. This feature is of special use
while travelling.
•
Press the FM•T button
3
for at least
two seconds.
The set searches for the strongest FM
stations and memorizes them on the
“T” storage level (Travelstore). Once
the process is finished, the car radio
automatically tunes in to the strongest
station.
If required, it is also possible to manually
store a station on the Travelstore level. If less
than 5 stations can be received, the free
buttons are briefly represented by dashes.
Activating a Stored Station
If required, the memorized stations can be
activated at a keystroke.
•
For this, choose the FM or T storage
level and briefly
•
press the respective preset button
:
.
Traffic Messages (ARI)
Many FM stations broadcast local traffic
messages at regular intervals. These sta-
tions can easily be detected with the ARI
system. A traffic station is identified by the
“SK” indication on display
9
g (“SK” stands
for the German equivalent for “station identi-
fication”).
Switching Traffic Messages On and Off
The ARI function is switched on by pressing
the ARI button
4
. Display
9
c will then give
you the “ARI” indication. When listening to a
station without the ARI identification, an au-
dible alarm tone will be produced after appro-
ximately 3 seconds.
Acoustic Alarm
When leaving the coverage area of the tuned
in station, your car radio automatically sends
out an acoustic alarm after approximately 30
seconds. This alarm tone is also produced
when pressing a preset button with a non-
ARI station allocated to it.
ARI during CD Operation
This set offers you the opportunity to listen to
a compact disk and at the same time be
prepared for incoming traffic messages.
When such a message comes in, the CD title
will be muted until the message is over.
To select this ARI preference during CD
reproduction,
•
shift to the radio mode using the SRC
button
6
.
