Blaupunkt Acapulco MP52, Руководство по эксплуатации

Страница: 27 / 38

27
FRANÇAIS
ENGLISH
ESP
AÑOL
PORTUGUÊS
Equalizer
This car radio is fitted with five parametric
digital equalizers, which can be set indi-
vidually. This means you have the means
to save and request different equalizer
settings for different situations (eg only
driver, driver and front passenger or vehi-
cle occupants in front and back).
“Parametric” means that for each of the
five filters, one frequency can be individ-
ually raised or lowered (GAIN +8 to
-8). The following filters are available:
●
SUB LOW EQ 32 - 50 Hz
●
LOW EQ 63 - 250 Hz
●
MID EQ 315 - 1250 Hz
●
MID/HIGH EQ 1600 - 6300 Hz
●
HIGH EQ 8000 - 12500 Hz
These filters can be set without meas-
uring equipment. This means that the
sound quality inside the vehicle can be
greatly influenced.
Presets for different car models (CAR
PRESETS) and musical styles (SND
PRESETS) can also be selected.
Notes on adjusting the equalizer
We recommend you use a CD you are fa-
miliar with when adjusting the equalizer.
Before adjusting the equalizer, set the
tone and volume balance to zero. To do
this, please see the chapter “Tone and
volume balance”.
➮
Listen to the CD.
➮
Evaluate the tone impression ac-
cording to your taste.
➮
Now consult the chart “An aid to
adjusting the equalizer” in the
“Sound impression” section.
➮
Set the equalizer values as de-
scribed under “What to do”.
Switching the equalizer on/off
➮
To switch on the equalizer, hold
down the DEQ button
<
until EQ
lights up on the display “EQ ON” is
briefly displayed.
➮
To switch on the equalizer, hold
down the DEQ button
<
until EQ
disappears from the display “EQ
OFF” is briefly displayed.
Setting the equalizer
➮
Press the DEQ button
<
.
➮
Select “DIGITAL EQ” using the
or button
:
.
➮
Select the equalizer “USER EQ1”,
“USER EQ2” or “USER EQ3”,
which you would like to set by
pressing the or the button
:
.
➮
Select the filter using the or
button
:
.
➮
Press the or button
:
.
➮
To select the frequency, press the
or button
:
.
➮
Set the level using the or but-
ton
:
.
➮
To select the next filter, first press
the OK button
;
, then the or
button
:
.
➮
When all the settings have been se-
lected, press the DEQ button
<
.
EQUALIZER