70
Calling up the TV menu
To change to the TV menu,
during the TV mode in the cockpit or
cabin area, press the corresponding
rotary/pushbutton
I
for the cockpit
or
:
for the cabin.
The fi rst menu item from the menu is dis-
played.
Settings in the TV menu
"<SEARCH": Station seek tuning back-
wards.
"SEARCH>": Station seek tuning for-
wards.
"PROG-": Selects previous program lo-
cation.
"PROG+": Selects next program loca-
tion.
"
*
AUD": Allows to perform the settings
identical to the AUD button for cockpit
or cabin.
Note:
The "
*
AUD" setting in the TV menu is
only possible if the expanded menu is
activated. For further details, read the
section "Expanded menu" in the chap-
ter "DSC menu".
쏅
•
•
•
•
•
TV mode
TravelPilot
Operating a TravelPilot
A TravelPilot Coach Professional can be
connected to the CCU 02 for navigation.
The navigation output is in the cockpit on
the monitor of the TravelPilot or on the op-
tional CLX LCD monitor. In the cabin area,
the map display of the TravelPilot can be
shown on the connected monitors.
To operate the TravelPilot,
press the
NAV
button
H
.
Note:
Information about the use of the Travel-
Pilot can be found in the operating in-
structions of the TravelPilot.
The buttons
3
-
6
of the CCU 02 corres-
pond to the arrow buttons on the remote
control of the TravelPilot.
Selecting and confi rming menu items as it
is done with the
OK
button of the TravelPi-
lot remote control, is carried out by pushing
the left rotary/pushbutton
I
.
The buttons
A
information ( ) and
B
traffi c jam detours (
,
) correspond
to those on the TravelPilot remote control.
Calling the map display
To show the map display of the TravelPilot
on the monitors in the cabin area (only in
conjunction with the CLX or an RGB/FBAS
converter),
press the
MAP
button
9
.
쏅
쏅
02_CCU02MP3Prof_eng.indd 70
02_CCU02MP3Prof_eng.indd 70
16.08.2006 14:49:01 Uhr
16.08.2006 14:49:01 Uhr