Blaupunkt 5SL92500, Инструкция по эксплуатации, Страница: 12 / 52

4. CONTROLS
Key Key pressing Function LED
L Short Turns the lights on/off at the maximum intensity. -
T1 Long with hood
down
It lifts the hood On/Off
Short with hood
down
Turns the hood on/off. On/Off
Short with hood up The hood turns off. On/Off
Short with hood up The hood stops.
The hood turns on at the second speed.
On/Off
The electronics recognise two types of anomalies and provide the relevant
indication
:
T1 Led
Slow
flashing
Exceeding of the current absorption threshold:
In the event of an overload condition, the anomaly is signalled by the flashing of LED T1 on the keypad every 2
seconds. Check that there are no obstacles during the movement of the hood. This signal remains active until a
new hood opening/closing command is given.
Fast flash-
ing
Intervention of the safety micro during opening:
In case of intervention of the safety micro, the anomaly is signalled by LED T1 which will flash quickly (every
250ms) meaning that the hood has passed the limit switch.
Contact Technical Assistance!
During this anomaly it is always possible to access the hood functions (lights and motor) and, if the motor is on,
the LED T1 will continue to flash, indicating that the anomaly is still present.
5. REMOTE CONTROL
• This appliance can be controlled by
means of a remote control.
Hood open:
The motor turns off and the hood starts to move
upwards.
Hood closed:
When pressed once, the hood moves down;
when pressed again, the hood stops. This condi-
tion should be considered as hood open even if it
is not completely open; all functions are enabled.
When the movement has ended, the motor starts
at speed 2.
6. ADDITIONAL
INSTRUCTIONS FOR
THE INSTALLER
B
Procedure for intervening in the case
of faulty movement
• Check that the fuse is correctly inser-
ted and not blown; for any replace-
ment open the lighting unit and un-
screw the fuse holder, replacing it
with one of the same characteristics
(ref.B).
12