Blaupunkt 5II.4 Series Скачать руководство пользователя

Страница: 10 / 24

Operating the appliance

Residual heat indicator

The hob has a residual heat indicator for each hotplate.

This indicates that a hotplate is still hot. Do not touch a

hotplate while the residual heat indicator is lit up.
The following are shown depending on the amount of

residual heat:

■

Display

•

: High temperature

■

Display

: Low temperature

If you remove the cookware from the hotplate during

cooking, the residual heat indicator and the selected

heat setting will flash alternately.
When the hotplate is switched off, the residual heat

indicator will light up. Even after the hob has been

switched off, the residual heat indicator will stay lit for as

long as the hotplate is still warm.

Operating the appliance

Operating

the appl

iance

This chapter explains how to set a hotplate. The table

shows heat settings and cooking times for various

meals.

Switching the hob on and off

The main switch is used to switch the hob on and off.
To switch on: Touch the

symbol. An audible signal

sounds. The indicator next to the main switch and the

hotplate indicators

‹

light up. The hob is ready to use.

To switch off: Touch the

symbol until the indicator

goes out. All hotplates are switched off. The residual

heat indicator remains lit until the hotplates have cooled

down sufficiently.

Notes

■

The hob switches off automatically if all hotplates

have been switched off for more than 20 seconds.

■

The selected settings are stored for four seconds

after the hob has been switched off. If you switch it

on again during this time, the hob will operate using

the previously stored settings.

Setting a hotplate

Use the

and

symbols to select the required heat

setting.
Heat setting

‚

= lowest setting.

Heat setting

= highest setting.

Every heat setting has an intermediate setting. This is

marked with a dot.

Selecting a hotplate and heat setting

The hob must be switched on.

Select the hotplate using the

symbol for the

relevant hotplate.

Touch the

symbol within 10 seconds. The

following basic setting appears:

symbol:

heat setting

symbol:

…

heat setting

The heat setting is set.

Содержание 5II.4 Series

























Результаты поиска

Содержание 5II.4 Series

Отзывы:

Похожие инструкции для 5II.4 Series

Бренды по названию

Популярные бренды

Blaupunkt 5II.4 Series, Инструкция по эксплуатации

Результаты поиска

Содержание 5II.4 Series

Отзывы:

Похожие инструкции для 5II.4 Series

Бренды по названию

Популярные бренды