18
ERROR CODES
During steam cooking, the following error codes may be displayed:
E-06:
1- The water tank is not properly closed.
E-05:
The water system is not working properly. Contact customer service.
Possible causes:
1- The water sensor is not working.
2- The water pipe is not working.
3- The water pump is not working.
4- The water tank is not working.
17. Automatic deposit removal function
For best cleaning results, we recommend the use of sodium citrate. Follow the manufacturer's
instructions on the packaging. If the steam function has been running for 20 hours, the descaling
function should be switched on afterwards.
1) Switch on the system. Remove the water tank and add 1000 ml of fresh water and a pack of
descaling agent.
2) Push the water tank back in.
3) In standby mode, tap the button several times until the display shows A15. This means that
the appliance has switched on the automatic descaling function. The 40:00 min display will light
up. The symbol for the water tank will show the current water level and other symbols will
disappear.
4) Press
to start the program.
5) If 10 min remain, the program will stop and water must be refilled. Remove the water tank and
pour the water in. Clean the water tank thoroughly.
6) Replace the fresh water, touch
to continue. five cooking modes.
7) When remained time count down to 4:00, repeat step 6.
NOTE:
Do not interrupt the descaling process. If the descaling process is interrupted before the
end, the entire program must be restarted starting from step 3.
18. Temperature sensor
1) You can use the temperature sensor in five cooking modes. When you use it, a signal will
sound. The display will show “Prob”.
2) In “Temperature sensor” mode, tap to select the heating mode. The default temperature of
the temperature sensor will appear on the display.
3) Touch
to select the temperature setting mode.
4) Tap
or or move the Smart Slider
to set the target temperature of the
temperature sensor.
5) Press
to start the program. When the core temperature of the food reaches the target
temperature of the temperature sensor, a signal will sound five times and the cooking process
will be stopped.
