Blaupunkt 5901750504570, Руководство пользователя

Страница: 7 / 88

5
5. Blender lid
3b. Gasket
4. Jug lid
6. Blender lid opening
2. Rotor
3. Jug
7. Blender lid plug with a measuring cup
1. Body with the motor
3a. Blade fixing nut
3c. Blade
3. The temperature or overload breaker could trip after the blender runs for too long or grinds very
hard ingredients. Wait 10-20 minutes for the blender to cool down and try to switch on the appliance
again.
Switch off the appliance when you obtain the required ingredients consistency. Do not switch on the
blender for more than 2 minutes. Wait 30 minutes before switching on the appliance again.
2.Clean the blender according to the instructions provided in the CLEANING AND MAINTENANCE
section.
Insert the power cord plug into a power outlet.
In order to use the cocktail bottle:
After preparing the cocktail, unscrew the blade assembly (3) from the bottle (11). Screw the lid on (12).
Unplug the appliance once you finished the operation.
Put the ingredients in the bottle. Pour some water. It is recommended not to fill the bottle with
ingredients above ¾ of its capacity. Screw the blade assembly (3) onto the cocktail bottle (11). Place
the cocktail bottle with the attached blade assembly on the appliance's body (1) by fitting the rotor (2),
and then rotate to lock.
1. Ensure the jug lid is correctly fitted and turned to a position perpendicular to the handle.
Press the operation mode button again or rotate the knob to “0” position to switch off the blender.
BEFORE FIRST USE
TABLE BLENDER OPERATION
The blender is equipped with the power switch lock and automatic switching off function in case the
operation conditions are not safe.
Place the jug (3) on the appliance's body (1) by fitting the rotor (2) into the blade assembly clutch at the
bottom of the jug. Put the ingredients into the jug. Pour some water. It is recommended not to fill the
jug with ingredients above ¾ of its capacity. Cover the jug with the lid (4).
1.Remove all paper, cardboard and film protecting the blender and its parts.
To select one out of the two automatic programs, press the button of the selected automatic program:
smoothie (8d, Smoothie drink), ice crushing (8c, Ice crushing). For a series of short bursts of the
maximum speed, press the “pulse” button (8b) repeatedly. Otherwise, set the blender rotational speed
with the selection knob (8a).
For better mixing and grinding of ingredients, you can use a pusher to direct the ingredients towards
the blade.
APPLIANCE SAFETY FEATURES
Note: Hold the jug during the appliance's operation.
If the blender does not start or it switches off:
2. Ensure the jug is correctly fitted on the rotor and turned so that the handle is perpendicular to the
control panel line.
8a. Rotational speed knob
8. Control panel
8b. Pulse button – “Turbo” pulse operation
mode
8c. “Ice crushing” program button
8d. “Smoothie” program button
9. Pusher
10. Blade fixing nut gripper
12. Cocktail bottle lid
11. Tritan cocktail bottle
TBG801