BLAUBERG Smart Wi-Fi, Руководство пользователя

Страница: 15 / 32

15
www.blaubergventilatoren.de
Smart Wi-Fi
SPECIAL «SETUP MODE/RESET»
To restore the Wi-Fi password or connect to the fan in order to change the settings,
Setup Mode
is provided .
To enter the
Setup Mode
, press and hold the button below the front panel of the ventilator for 5 seconds until the LED starts blinking
blue.
The unit will continue in this mode for 3 minutes and then will automatically revert to the previous settings.
To immediately exit the setup mode, press and hold the button again for 4 seconds until the LED stops blinking blue and starts glowing
red. In
Setup Mode
, connect to the fan using a mobile device:
Wi-Fi name
: Setup mode.
Wi-Fi password
: 11111111.
To reset factory settings, press and hold the button for 14 seconds until the LED starts blinking red and a beep is produced.
Button
LED
The LED has the following states:
•
Switched off.
Normal operation mode of the device.
•
Glowing blue.
Warning of switching the device to the
Setup
Mode.
•
Blinking blue.
The device is in Setup Mode.
•
Glowing red.
Warning of return to factory settings or exit from
the
Setup Mode.
•
Blinking red.
All the fan parameters are successfully reset to
factory settings.