BLAUBERG Axis-Jet Series, Руководство пользователя

Страница: 12 / 20

www.blaubergventilatoren.de
axis-Jet
12
• The unit is rated for connection to 3~400 V/50 Hz according to the wiring diagram. The connection must be made using insulated
conductors (cables, wires). The actual wire cross section selection must be based on the maximum load current, maximum conductor
temperature depending on the wire type, insulation, length and installation method.
• The unit must be connected to power supply in accordance with the applicable standards.
The axial impulse fan is designed for integration into an automatic control system and is not intended for standalone operation.
Connect the fan motor via the terminal block (X1) by means of a durable heat-resistant insulated cable according to the wiring diagram
and the terminal designations.
The terminal block and the terminal designation label are inside the terminal box. The terminal box is installed on the fan casing or on a
mounting bracket depending on the particular model.
Single-speed fan wiring diagram Two-speed fan wiring diagram:
- running at low speed
L1
L3
X1
1
2
3
L3
L1
PE
3~400 V/50 Hz
L2
4 PE
L2
X1
L3
L1
L2
1
2
3
4
5
6
U1
V1
W1
U2
V2
W2
3~400 V/50 Hz
PE
PE
- running at high speed
X1
L3
L1
3~400 V/50 Hz
L2
1
2
3
4
5
6
U1
V1
W1
U2
V2
W2
PE
PE
X1
L3
L1
L2
1
2
3
4
5
6
U1
V1
W1
U2
V2
W2
3~400 V/50 Hz
PE
PE
DISCONNECT THE POWER SUPPLY PRIOR TO ANY OPERATIONS WITH THE UNIT.
CONNECTION OF THE UNIT TO POWER MAINS IS ALLOWED BY A QUALIFIED
ELECTRICIAN WITH A WORK PERMIT FOR THE ELECTRIC UNITS UP TO 1000 V AFTER
CAREFUL READING OF THE PRESENT USER’S MANUAL. THE RATED ELECTRICAL
PARAMETERS OF THE UNIT ARE GIVEN ON THE MANUFACTURER’S LABEL.
ANY TAMPERING WITH THE INTERNAL CONNECTIONS IS PROHIBITED
AND WILL VOID THE WARRANTY.
CONNECTION TO POWER MAINS