www.blaubergventilatoren.de
vento expert (Duo) a W v.2
5
TECHNICAL DATA
A
Ø 160
(Ø 6
5
/
16
")
A
L
L
Air duct length
Wall thickness
Wall thickness is above the minimum
Wall thickness is minimal
Outer ventilation
hood
Front panel
Front panel
Cartridge
Cartridge
Air duct length
Wall thickness
Outer ventilation
hood
68
235
285
207
85
137
138
207
85
137
138
Vento Expert
Vento Expert Duo
The unit is designed for indoor application at the following conditions:
•
for Vento Expert: outside air temperature from -15 ˚C (5 °F) up to +40 ˚C (104 °F) and relative indoor humidity up to 50 %
•
for Vento Expert Duo: outside air temperature from -15 ˚C (5 °F) up to +40 ˚C (104 °F) and relative indoor humidity up to 65 %
The unit has Class II of protection against electric shock and must not be grounded.
Hazardous parts access and water ingress protection rating is IP24.
The unit design is constantly being improved, so some models may be slightly different from those ones described in this manual.
Technical data are stated on the rating plate on the casing individually for each ventilation unit.
A: protruding part of the air duct on the outer wall. Depends on the used
ventilation hood type.
L: cartridge length. Depends on the ventilator model.
The air duct length and the supplied ventilation hood model depend on the
ventilator model (refer to Designation key, page 4).
The overall and connecting dimensions of the outer ventilation hood, the
value of the protruding part of the air duct on the outside A and installation
steps for the outer hood are stated in the mounting instruction for the outer
hood.
Overall dimensions of the front panel are shown below
Ventilator model
L [mm]
Vento Expert A50(85)-1 W V.2
250
Vento Expert A100-1 W V.2
355
Vento Expert Duo A30-1 W V.2
280
